LumberJocks

Grizzly G0733 18" x 47" lathe in Eastern Washington

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by WoodworkingVet posted 08-13-2019 08:16 PM 915 views 0 times favorited 10 replies Add to Favorites Watch
View WoodworkingVet's profile

WoodworkingVet

18 posts in 837 days


08-13-2019 08:16 PM

Selling my Grizzly G0733 lathe. It has an 18” swing and 47” between centers, 220v 2hp motor. Its been lightly used, runs great and includes a spur drive, live center, spindle locking pin, large chuck with one set of jaws, faceplate, steady rest, sanding drum, straight tool rest, curved tool rest, adjustable feet, storage basket, headstock shelf and owners manual. Asking $1250, located in the Spokane WA area. Please send a PM if interested.

Also adding a threading jig to the lathe deal.


10 replies so far

View ibewjon's profile

ibewjon

825 posts in 3248 days


#1 posted 08-13-2019 10:00 PM

If you were closer to the Midwest…..

View WoodworkingVet's profile

WoodworkingVet

18 posts in 837 days


#2 posted 08-14-2019 01:09 AM

Wish you were closer too, or that it would be easy to meet half way.

View Kelly's profile

Kelly

2398 posts in 3399 days


#3 posted 08-14-2019 01:57 AM

Since I’d have to drive two hours and fifteen minutes, one way, would you consider knocking off $1,250.00 for gas. P.S. Do you deliver?

Seriously, it’s nice deal. Should go QUICK.

View WoodworkingVet's profile

WoodworkingVet

18 posts in 837 days


#4 posted 08-14-2019 02:07 AM



Since I d have to drive two hours and fifteen minutes, one way, would you consider knocking off $1,250.00 for gas. P.S. Do you deliver?

Seriously, it s nice deal. Should go QUICK.

- Kelly

Good try Kelly on the discount for gas!! But probably not. If you’re only 2.5 hours away, where are you? There are a few places I go once in a while that are about 2.5 hours away. If you’re really interested in the lathe send me a message.

Hope it goes fast, I tried to price it fairly. There is even a threading tool with it but I never used it. Come get it and I’ll throw in some wood, elm, maybe walnut, maple, whatever I have extra of. I need a bit more room in my shop before winter.

View Kelly's profile

Kelly

2398 posts in 3399 days


#5 posted 08-14-2019 02:42 AM

I’m, pretty much literally, in the middle of everywhere WAshington. A place called Desert Aire, which is about five miles from Mattawa.

It seems any city of significance is around an hour from here, whether I head to Ephrata, Tri-Cities, Yakima, Ellensburg, Ephrata, Moses Lake or Othello (end of that circle).

I can, nearly, see the lights of Hanford, or Priest Rapids or Wanapum dam.

I get to the Spokane area on occasion, when the VA sends me there.

On lathes, I have two, so will have to pass for now.

View WoodenDreams's profile

WoodenDreams

679 posts in 366 days


#6 posted 08-14-2019 03:54 AM

It’s worth the price, especially with the extras. I get to Spokanne once a year to visit, won’t be out there till spring. If still available let me know.

View WoodworkingVet's profile

WoodworkingVet

18 posts in 837 days


#7 posted 08-14-2019 04:18 AM



It s worth the price, especially with the extras. I get to Spokanne once a year to visit, won t be out there till spring. If still available let me know.

- WoodenDreams

Well, thank you for your comment. I hope it sells well before spring, but on the off chance it didn’t me sure to let me know when you’re here.

View WoodworkingVet's profile

WoodworkingVet

18 posts in 837 days


#8 posted 08-14-2019 04:18 AM

Adding a threading jig that I just found to go with the lathe.

View mudflap4869's profile

mudflap4869

1967 posts in 1914 days


#9 posted 08-14-2019 05:00 AM

GRIZZLY showroom is about 125 miles away in Springfield Mo. Round trip would be a couple of miles closer than Spokane. Probably save that much on gas and motel rooms. Danged economics will get you every time.

-- Still trying to master kindling making

View WoodworkingVet's profile

WoodworkingVet

18 posts in 837 days


#10 posted 08-16-2019 01:09 AM

The lathe has sold

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com