WTB Sawstop PCS 1.75 or 3 hp

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by dbw posted 08-10-2019 01:30 PM 376 views 0 times favorited 4 replies Add to Favorites Watch
View dbw's profile


312 posts in 2145 days

08-10-2019 01:30 PM

Topic tags/keywords: sawstop pcs

I am in the market for a Sawstop PCS 1.75 or 3 hp saw. I don’t need the fence, rails, extension table, blade, or miter gauge. All I need is the (properly working) saw, cast iron wing, brake cartridge, blade wrenches, allen key, and the plastic spacer gauge.

-- measure 3 times, cut once

4 replies so far

View RPhillips's profile


1285 posts in 2345 days

#1 posted 08-10-2019 04:04 PM

for me, the cost difference is fairly minor when considering the HP improvement. So I’ll be going with a 3hp PCS hopefully next year. The sliding table attachment really has caught my eye, but most likely would never be used to it’s potential in my shop.

Good luck with your decision.

-- Rob - Indianapolis IN - Learning... one mistake at a time...

View avsmusic1's profile


528 posts in 1194 days

#2 posted 08-11-2019 01:34 PM

You may want to post a location
Also, I understand that you may not need some of the fence components or accessories but be prepared to buy them- finding one of these used at a good price can be hard enough but finding one that is missing pieces and/or from a seller who is willing to part out out the saw will be nearly impossible

Good luck though

View dbw's profile


312 posts in 2145 days

#3 posted 08-11-2019 03:49 PM

Garland, TX. FYI the reason I don’t need the fence is because I have an Incra TS-LS and all the accessories with which it comes, i.e,, router table insert, legs, etc. I also need a mobile base.

-- measure 3 times, cut once

View RJweb's profile


133 posts in 3141 days

#4 posted 08-11-2019 04:11 PM

I was un decided also about 3 years ago, 1.75 or 3 hp, well i went with the 3 hp and glade i did, will cut anything i throw at it no trouble, RJ

-- Life Begins @ 190 MPH

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics