LumberJocks

Looking for answers

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by CJ105 posted 02-23-2019 02:29 AM 261 views 0 times favorited 5 replies Add to Favorites Watch
View CJ105's profile

CJ105

3 posts in 59 days


02-23-2019 02:29 AM

I have seen a lot on other sites and this one for Rockwell Unisaws. What I have not seen is the model I just acquired. I have a 34-803. I have seen 34-801, 34-802 but cannot find any information about the model I have. Any help would be appreciated If my understanding of the serial number is correct, it was made in 1984. 84M02408 in the serial number.


5 replies so far

View Lazyman's profile

Lazyman

3091 posts in 1685 days


#1 posted 02-23-2019 03:10 AM

You probably just mistyped but I think you meant Rockwell not Rockler. I just did a quick google search and I get a few hits on that model number (for example). If you list some of the specific information you are looking for, someone will probably have the information you are looking for.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View MrUnix's profile

MrUnix

7243 posts in 2497 days


#2 posted 02-23-2019 06:53 PM

Don’t get too hung up over the catalog number… The same saw can have multiple numbers depending on how it’s configured – motor size, single or three phase, type of fence supplied, how many extension wings, etc…

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View CJ105's profile

CJ105

3 posts in 59 days


#3 posted 02-23-2019 07:22 PM

Thank you, yes you are correct on the name, it is a Rockwell, by the way the picture is my saw on vintage machinery, which I understand based on what I have seen could also be Delta. I will be needing parts for it. Definitely have to replace the fence, one of the rails is bent.

View CJ105's profile

CJ105

3 posts in 59 days


#4 posted 02-23-2019 07:45 PM

If you look at the controller, it lookms like it is 230V , looking at the panel it indicates that my 5hp motor might be running on single phase power.

https://s3.amazonaws.com/vs-lumberjocks.com/pnea2et.jpg!

View MrUnix's profile

MrUnix

7243 posts in 2497 days


#5 posted 02-23-2019 08:06 PM

You have 3-phase coming in (4 wires – Red/white/black/green). Look on the motor data plate to see what motor you have (single or three phase).

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com