LumberJocks

Getting the new cabinet saw down up three and then down 10 steps

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by eldercop posted 02-19-2019 12:47 AM 443 views 0 times favorited 6 replies Add to Favorites Watch
View eldercop's profile

eldercop

75 posts in 1806 days


02-19-2019 12:47 AM

Topic tags/keywords: machine moving stairs

We rented this device and it made getting the Jet Exacta if not a breeze the the next best thing.
Some tips:
A few dry runs without a load is very beneficial. Its not exactly intuitive to use, but the rythm comes easily
Uncrate the machine and get it off the pallet if there is one. Boxed machines often b ig spaces inside the would crush under the straps.
Its helpful if a spotter at the bottom of the stairs can let you know where the edge of the step it. It can be hard to see under the load.
Here’s the video: https://www.youtube.com/watch?v=ZzLBlsBi_Vs

The gun safe should be a piece of cake after this.

-- "Experience is what you get the day after you needed it" Mark Twain


6 replies so far

View Planeman40's profile

Planeman40

1365 posts in 3058 days


#1 posted 02-19-2019 02:13 PM

Thanks! I am putting that in my bag of tricks!!!

-- Always remember: It is a mathematical certainty that half the people in this country are below average in intelligence!

View John Smith's profile

John Smith

1680 posts in 460 days


#2 posted 02-19-2019 02:49 PM

NICE !!! Thanks for sharing !

that dolly not only saves time –
but adds that extra layer of personal safety that we all need.

.

.

-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

View avsmusic1's profile

avsmusic1

343 posts in 983 days


#3 posted 02-19-2019 05:40 PM

nice!

Where did you rent it from?

View WayneC's profile

WayneC

14258 posts in 4395 days


#4 posted 02-19-2019 05:55 PM

That’s brilliant.

-- We must guard our enthusiasm as we would our life - James Krenov

View Fresch's profile

Fresch

406 posts in 2218 days


#5 posted 02-19-2019 06:44 PM

Why didn’t I think of this!

View eldercop's profile

eldercop

75 posts in 1806 days


#6 posted 02-19-2019 06:50 PM

Rented from Arapahoe Rental in Denver
Load limit according to the label is 1200#
Cost was 65 bucks for four hours

-- "Experience is what you get the day after you needed it" Mark Twain

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com