Router table extension

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Sparks500 posted 01-04-2019 02:57 PM 333 views 0 times favorited 1 reply Add to Favorites Watch
View Sparks500's profile


277 posts in 1107 days

01-04-2019 02:57 PM

I know this has probably been talked about a lot, but I’m going to build a router table into my 52” table saw extension and I’m looking for ideas.

It’s an old powermatic with 3’ to the right of the table. It has an old heavy duty biesemyer fence on it, and, I wound up with an extra fence that I could modify to be a dedicated router fence.

I’m trying to maximize room in the basement hobby shop and I have a track saw for breaking down sheet goods, so I rarely need the capacity of the 52” rails..


-- A good day is any day that you're alive....

1 reply so far

View GrantA's profile


2573 posts in 2184 days

#1 posted 01-04-2019 03:17 PM

I love my incra router plate mounted in the saw, when I build a new wing for the unisaw that’s waiting patiently under my shelter I think I’ll just pony up and order the template from incra, my router slipped on this one (I used a forster for the corners then straight edges to connect them)
If the budget allows check out their clean sweep setup too!
Or you might just want to buy one of their extensions as a kit

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics