LumberJocks

Large wood screw and nut - Gone

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by Tim Dahn posted 12-22-2018 03:04 PM 1082 views 1 time favorited 9 replies Add to Favorites Watch
View Tim Dahn's profile

Tim Dahn

1590 posts in 4078 days


12-22-2018 03:04 PM

I have a large screw and a nut for a workbench vice anyone can have for the shipping cost. I was going to make a vice for my workbench but went a different direction and now I know longer need it so just passing it along to someone that can use it. Also included is the additional smaller screw as shown in the pictures.

-- Good judgement comes from experience and experience comes from poor judgement.


9 replies so far

View John Smith's profile

John Smith

2017 posts in 675 days


#1 posted 12-22-2018 07:36 PM

that’s a very generous offer, Tim.

I’ve been watching this one on E-Bay.

.

-- I am a painter. That's what I do. I paint things --

View Tim Dahn's profile

Tim Dahn

1590 posts in 4078 days


#2 posted 12-22-2018 09:58 PM

Lake Eire is top of the line and from my hometown!

-- Good judgement comes from experience and experience comes from poor judgement.

View Holbs's profile

Holbs

2246 posts in 2542 days


#3 posted 12-22-2018 11:16 PM

are they actually in Erie, home of my birthplace?
maybe I should strut down my childhood years this summer :)

Tim.. would this wood vise work on a sliding deadman as well?

-- The Carpenter Bee is derived from the Ancient Greek word wood-cutter "xylokopos/ξυλοκὀπος"

View theoldfart's profile

theoldfart

10908 posts in 2964 days


#4 posted 12-23-2018 12:12 AM

Sent Tim a PM.

Holbs, if you want it it’s yours, I hope I’m second in line.

-- "With every tool obtained, there is another that is needed" DonW ( Kevin )

View GrantA's profile

GrantA

1828 posts in 1920 days


#5 posted 12-23-2018 12:19 AM

Whoever gets this, measure the thread diameter and tpi and a few of us who just bought some taps & dies might be able to make a nut for it

View Holbs's profile

Holbs

2246 posts in 2542 days


#6 posted 12-23-2018 02:52 AM

you first, Old Fart :)
Only thing I could use this for, is on sliding deadman. It would be better served as a main vise by someone here. But would be cool to have :)

-- The Carpenter Bee is derived from the Ancient Greek word wood-cutter "xylokopos/ξυλοκὀπος"

View theoldfart's profile

theoldfart

10908 posts in 2964 days


#7 posted 12-23-2018 05:36 AM

Holbs, it’s destined for an experimental end vise. I made a Roubo 48” frame saw for resawing. It’ll take two screws like this to make a vise strong enough to hold the slabs I’m cutting. Think of a Moxon vise on steroids!

-- "With every tool obtained, there is another that is needed" DonW ( Kevin )

View Tim Dahn's profile

Tim Dahn

1590 posts in 4078 days


#8 posted 01-03-2019 12:26 AM

oldfart – I am curious what wood the nut is, kind of looks like mahogany? but hard and heavy.

-- Good judgement comes from experience and experience comes from poor judgement.

View theoldfart's profile

theoldfart

10908 posts in 2964 days


#9 posted 01-03-2019 02:56 AM

Tim, I can’t tell from the pictures. I’ll let you know when it gets here. A good chance it may be beech.

-- "With every tool obtained, there is another that is needed" DonW ( Kevin )

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com