Aligning Woodmaster infeed/outfeed rollers

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by CodyKauz posted 12-14-2018 02:31 AM 254 views 0 times favorited 0 replies Add to Favorites Watch
View CodyKauz's profile


4 posts in 892 days

12-14-2018 02:31 AM

Hey guys, I’ve tried to search for this to no avail but I have a 38” woodmaster drum sander. The infeed and outfeed rollers are not in alignment with the conveyor and I was getting basically snipe when the end of the work piece would hit the outfeed roller and lift up into the drum. I ended up removing the outfeed rollers and have been getting better sanding results but it’s slowed my process. Also, on the infeed side the first of the two rollers is too low and basically serves no purpose. Anyone familiar with this issue or have any suggestions?

0 replies so far

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics