Rockwell Unisaw 34-466 arbor bearings size

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by CVN72 posted 12-13-2018 06:26 PM 560 views 0 times favorited 3 replies Add to Favorites Watch
View CVN72's profile


13 posts in 621 days

12-13-2018 06:26 PM


The Rockwell Unisaw manual for the 34-466 lists two arbor bearings, SP-5344 (.6693×1.5748x.563) and SP-5335 (.6693×1.5748x.4724). The 6203 bearing is sized for the SP-5335 bearing. I do not see a bearing that matches the SP-5344 bearing in the Accurate Bearing Company catalog. Will two 6203 bearings work?


3 replies so far

View MrUnix's profile (online now)


7595 posts in 2805 days

#1 posted 12-13-2018 08:58 PM

At some point in time, Delta switched from bearings with an extended inner race (88503) to more standard bearings without the extended race (6203). Pull the ones you have now and see which ones you need. They should have the number stamped on the side and you can take measurements to verify.


-- Brad in FL - In Dog I trust... everything else is questionable

View CVN72's profile


13 posts in 621 days

#2 posted 12-13-2018 09:34 PM

OK, I was hoping to not have to pull the bearings before ordering new ones, but that looks to be the safest way.

Thanks for the information.

View TheFridge's profile


10859 posts in 2093 days

#3 posted 12-14-2018 03:03 AM

Unfortunately. It’s how it works out all the time.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics