LumberJocks

Parts/Accy's for Circa 1997 Jet JWTS-10JF

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Spinzwood posted 12-05-2018 04:54 PM 645 views 0 times favorited 5 replies Add to Favorites Watch
View Spinzwood's profile

Spinzwood

16 posts in 1145 days


12-05-2018 04:54 PM

Anyone know where there are parts, aftermarket or otherwise, for this saw. Just picked up a pristine one yesterday with two cast wings and support for the wings.

I’m hoping to find a dado insert and possible a mobile base for now.


5 replies so far

View CaptainKlutz's profile

CaptainKlutz

3171 posts in 2266 days


#1 posted 12-05-2018 08:22 PM

http://letmegooglethat.com/?q=jet+jwts-10+dado+insert

http://letmegooglethat.com/?q=jet+jwts-10+mobile+base

-- If it wasn't for bad luck, I wouldn't have no luck at all, - Albert King - Born Under a Bad Sign released 1967

View Spinzwood's profile

Spinzwood

16 posts in 1145 days


#2 posted 12-05-2018 08:38 PM

Doesn’t work for me. I can find Jet dado inserts.. but, I doin’t know if they are the proper size as the saw number s not the same.

View EdDantes's profile

EdDantes

74 posts in 683 days


#3 posted 12-06-2018 06:03 AM

I have this saw, but only has the stamped steel wings. I’m jealous.

I just make my own zero clearance inserts for regular/dado blades. But if you want to buy one, the Leecraft JT-164 should fit. Can’t confirm personally, but may be worth a try if you don’t go the DIY route.

I use the Grizzly Bear Crawl mobile base. For the money, I’m not sure you could do better.

View Bill_Steele's profile

Bill_Steele

705 posts in 2504 days


#4 posted 12-06-2018 07:49 PM

I also have this same saw with stamped steel wings—so I am also jealous. I’ve had this saw for a little over 20 years and its still going strong.

I make my own inserts using 1/2” plywood.

I made my own mobile base.

If your saw does not have a link belt or a PALS kit—those are 2 worthwhile upgrades in my opinion.

Pay attention to the plug connection between the motor and the on/off switch. I’ve had problems in the past where the saw will not turn on or turns off quickly after startup and I found that this connection was vibrating loose.

View Spinzwood's profile

Spinzwood

16 posts in 1145 days


#5 posted 12-06-2018 09:09 PM

Thanks, Bill
Not sure what a PALS kit is. I’m familiar with link belts but must confess I’ve never used one.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com