Atlas 3060

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Sawbreaker posted 12-03-2018 02:46 PM 786 views 0 times favorited 3 replies Add to Favorites Watch
View Sawbreaker's profile


4 posts in 422 days

12-03-2018 02:46 PM

Topic tags/keywords: bevel housing parts need for atlas

I picked up a atlas 3060 table saw and while I was playing with the bevel adjuster I broke the cast that the saw sits in .there is a front and back one with three 9/16 bolts, I think they may be called Bellevue housing.i took the 6 bolts out and coming up with a plan to set the saw just so I can do strait cuts until I can find the housing or have someone make one.or can find the parts that what I am looking for any help with the parts or direction or info anybody has would b nice! Thank you

3 replies so far

View MrRon's profile


5813 posts in 3854 days

#1 posted 12-03-2018 07:21 PM

That is a pretty old saw. I doubt that any parts could be found unless they come from a “parts” machine.

View MrUnix's profile


7601 posts in 2810 days

#2 posted 12-03-2018 07:34 PM

Nothing called ‘Bellevue housing’ in the parts diagram… post a picture. If it’s cast iron, you can get it brazed if unable to find a replacement.


-- Brad in FL - In Dog I trust... everything else is questionable

View Sawbreaker's profile


4 posts in 422 days

#3 posted 12-06-2018 10:33 PM

I found out they are called trunnions.i think the craftsman model 113 might be the same size, still trying to decipher if it is or not .

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics