Disassembling jointer tables

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by groland posted 11-10-2018 02:53 PM 534 views 0 times favorited 2 replies Add to Favorites Watch
View groland's profile


221 posts in 4021 days

11-10-2018 02:53 PM

Topic tags/keywords: disassembling jointer tables


I have an old Grizzly Model G1018HW jointer. (The “HW” indicates it has hand wheels instead of a lever to change the height of the tables.) My jointer is not correctly adjusted and is producing unacceptable results. It was fine before I cranked the outfeed table WAY up and down to loosen its very difficult-to-turn hand wheels. I have done all I can to align things, but cuts are terrible.

I think it might be time to disassemble and give the jointer a full cleaning, kubrication and adjustment. However, I can find no information on how to remove the tables, clean and reassemble the jointer.

Any information would be appreciated!

Many thanks

2 replies so far

View Richard's profile


11309 posts in 3642 days

#1 posted 11-13-2018 03:23 AM

Sorry! Wrong Post!

-- Richard (Ontario, CANADA)

View waho6o9's profile


8812 posts in 3186 days

#2 posted 11-13-2018 03:50 AM

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics