ISO Dewalt 735 feed tables. I have the planer, need the in / outfeed tables

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by Dreban posted 11-06-2018 02:17 AM 1284 views 0 times favorited 3 replies Add to Favorites Watch
View Dreban's profile


64 posts in 1248 days

11-06-2018 02:17 AM


3 replies so far

View therealSteveN's profile


8818 posts in 1812 days

#1 posted 11-10-2018 07:09 AM

I’ve seen this unanswered for a few days, so I will drop my thought. The school is split on the need for the in/outfeed tables on a lunchbox planer. Those against are never going to see a snipe free finish, some advocate it’s easier to chop off a few inches, and not worry about it. Some want the support for both finish, safety, and ease of use.

Those who have them will seldom give them up without a fight.

Coming onto Christmas deals you may want to entertain grabbing up anything that gets them below that 100 bux you usually see them at.

-- Think safe, be safe

View MrUnix's profile


8769 posts in 3436 days

#2 posted 11-10-2018 07:38 AM

$45 on amazon (no tax and free shipping if you are a Prime member), or about the same at your local Home Depot.

Or – built a longer auxiliary table out of some 12” wide laminated shelving for about $10.


-- Brad in FL - In Dog I trust... everything else is questionable

View Dreban's profile


64 posts in 1248 days

#3 posted 11-10-2018 05:41 PM

Thanks for the info. I like the tables because I want to raise them about a penny’s width on front and back to help with snipe. I’ll keep an eye out. I know they’re only about $45 on amazon, I’m just tapped for funds after buying the planer. haha.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics