LumberJocks

Minwax Antique Finish - clear or amber? Satin or gloss?

  • Advertise with us

« back to Finishing forum

Forum topic by jsk12 posted 11-04-2018 03:25 AM 872 views 0 times favorited 5 replies Add to Favorites Watch
View jsk12's profile

jsk12

39 posts in 934 days


11-04-2018 03:25 AM

i’ve read some stuff about minwax antique finish but i’m not sure of two things

1. is it clear or amber? on the ace hardware site it has two versions but on the minwax site it has just one version but it doesn’t say what it is

2. is it gloss, semi, satin? the minwax site doesn’t say (unless i missed it)

i’ve read lots of good things about minwax antique finish for cherry and walnut but i still am not sure about the above

many thanks


5 replies so far

View therealSteveN's profile

therealSteveN

2784 posts in 959 days


#1 posted 11-04-2018 06:22 AM

Sounds like an oil finish, most oils will yellow at least white woods.

Read the reviews, completely go down to the ones, at the 2 guy said new was reformulated and new did weird stuff old didn’t, but said old you could wipe off while wet, and get satin, let dry without wiping, and get gloss. Most of the reviews I read actually sounded like they had finished a project, with Amazoo reviews, that isn’t always the case. Most gave 5 stars.

Amazon page reviews at bottom.

Description made me think of Tru Oil. I love the Arm r Seal from General Finishes, have you tried that?

-- Think safe, be safe

View OSU55's profile

OSU55

2296 posts in 2374 days


#2 posted 11-04-2018 01:04 PM

Can looks the same as what I used 20 yrs ago and havent seen anything about changes. Has more of a brown vs amber tint, like the danish oils, which it is very similar to. More of a semi gloss. Be aware all of these are relatively soft and not for building much of a film thickness. Read about here. I prefer mw poly with a little or a lot of dye added. It has 2x the solids content of arm r seal so is a better value, just thin it 1:1 with ms. Consider them equal.

View Kirk650's profile

Kirk650

642 posts in 1133 days


#3 posted 11-04-2018 02:16 PM

A retired wood shop teacher told me that after 35 years of teaching, Minwax Antique Oil was his favorite wood finish. I bought some at that time (years ago) and have been a happy user since then. I prefer it to Danish Oil, and it dries overnight, unlike Danish Oil. It can be a bit hard to find.

View ColonelTravis's profile

ColonelTravis

1976 posts in 2279 days


#4 posted 11-04-2018 10:13 PM

Love this stuff. Looks kind of like maple syrup in color. I can’t tell you how it affects light wood. The “lightest” wood I’ve used it on is cherry and it’s wonderful, but use something like Charles Neil’s conditioner beforehand for cherry. Have used it on walnut and mesquite, looks terrific.

Definitely not glossy. Enough coats and I think you can approach semi-gloss. I have 3 coats on a desk and I wouldn’t call that one semi-gloss. I’ve gone five on other things and it comes close.

Reasons I like it: you get a terrific, natural look; wood feels great to touch; extremely easy to use.

View KYtoolsmith's profile

KYtoolsmith

78 posts in 245 days


#5 posted 11-05-2018 12:13 AM

+1 on what the Colonel said. Minwax antique oil is my absolute go to finish. I’ve used it for coffee tables to small boxes and even tool handles. Works on most domestic hard woods. Not great on pine… Amber color. I use it as a wipe on oil or build a finish by wet sanding between coats using mineral spirits. Usually I thin with MS or add Penetrol Flood at a 1:4 ratio. This finish is easily buffed if more sheen is desired. I find it quite durable and easily repaired.

My $.02 from Kentucky!

-- "Good enough" is just another way of saying "it could be better"...

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com