LumberJocks

Easing table leg edges

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by Phillym posted 11-02-2018 01:28 PM 515 views 0 times favorited 6 replies Add to Favorites Watch
View Phillym's profile

Phillym

7 posts in 797 days


11-02-2018 01:28 PM

Hello

So I made the mistake of not easing the edges on the table I built. I cannot use a block plane to ease the last 2 inches at the top because I have a vertical piece attached to the legs. Any suggestions on what to do.

Thank you


6 replies so far

View Nubsnstubs's profile

Nubsnstubs

1663 posts in 2341 days


#1 posted 11-02-2018 01:39 PM

Sandpaper, files or chisels and extreme care can be your friends in such a case you describe. .......... Jerry (in Tucson)

-- Jerry (in Tucson) www.woodturnerstools.com

View bondogaposis's profile

bondogaposis

5610 posts in 2962 days


#2 posted 11-02-2018 02:40 PM

Take a piece of PSA sandpaper and fold it over a putty knife.

-- Bondo Gaposis

View Bill White's profile

Bill White

5242 posts in 4571 days


#3 posted 11-02-2018 04:12 PM

Card scraper?

-- [email protected]

View WoodenDreams's profile

WoodenDreams

889 posts in 522 days


#4 posted 11-02-2018 05:59 PM

Sanding or scraper

View AlaskaGuy's profile

AlaskaGuy

5523 posts in 2920 days


#5 posted 11-02-2018 06:03 PM

Chisel/chisel plane,

-- Alaskan's for Global warming!

View Richard's profile

Richard

11309 posts in 3643 days


#6 posted 11-03-2018 01:55 AM



Sandpaper, files or chisels and extreme care can be your friends in such a case you describe. .......... Jerry (in Tucson)

- Nubsnstubs

Me Also. A1 Play it by the needs, of any and all specific Areas.

Rick S.

-- Richard (Ontario, CANADA)

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com