LumberJocks

Interesting way to do your sanding.

  • Advertise with us

« back to CNC Woodworking forum

Forum topic by AlaskaGuy posted 10-09-2018 05:57 AM 1309 views 0 times favorited 22 replies Add to Favorites Watch
View AlaskaGuy's profile

AlaskaGuy

5316 posts in 2729 days


10-09-2018 05:57 AM

@ the 12 minute mark.

https://youtu.be/zt1ES1WP454

-- Alaskan's for Global warming!


22 replies so far

View robscastle's profile

robscastle

6223 posts in 2624 days


#1 posted 10-09-2018 06:47 AM

A very interesting a video looks like a Torque Work center with partial NC

The sanding I guess its a NC version of a drum sander again letting the machine do the work.

Did you see the watch? cool!!

overall a very impressive project but I would be concerned about timber movement ruining the tolerances, it certainly looks good.

-- Regards Rob

View lumbering_on's profile

lumbering_on

578 posts in 909 days


#2 posted 10-09-2018 12:09 PM



A very interesting a video looks like a Torque Work center with partial NC

The sanding I guess its a NC version of a drum sander again letting the machine do the work.

Did you see the watch? cool!!

overall a very impressive project but I would be concerned about timber movement ruining the tolerances, it certainly looks good.

- robscastle

I was wondering what that machine was. I haven’t seen one of them before, but it is certainly fun to watch.

View Scap's profile

Scap

78 posts in 346 days


#3 posted 10-09-2018 12:39 PM

That was pretty amazing.
I completely geek out on stuff like that…

View Gene Howe's profile

Gene Howe

11629 posts in 3848 days


#4 posted 10-09-2018 01:36 PM

Amazing. I’m totally impressed.

-- Gene 'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton

View LesB's profile

LesB

2126 posts in 3863 days


#5 posted 10-09-2018 04:41 PM

Looks like a large CNC machine. Great for making multiple copies.
But…..I wonder what the set up time is and the learning curve on using it?

I did notice he used “baby” wipes to clean up the glue. May have to try that over wet paper towels.

-- Les B, Oregon

View pottz's profile

pottz

5552 posts in 1404 days


#6 posted 10-09-2018 06:21 PM

that machine and what he was making was just incredible.and im with les gotta try the baby wipe idea-lol.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View BroncoBrian's profile

BroncoBrian

875 posts in 2378 days


#7 posted 10-09-2018 08:01 PM

I enjoyed watching the video. Was that a router? Cool setup.

-- A severed foot is the ultimate stocking stuffer.

View Aj2's profile

Aj2

2321 posts in 2217 days


#8 posted 10-09-2018 08:18 PM

I thought the end result was horrible. The guy gots brains but no sense of design he also has short grain in the pins where the case joins in the corners. Maybe he doesn’t care or he’s to caught up in his overly complicated use of jointery.
:(

-- Aj

View robscastle's profile

robscastle

6223 posts in 2624 days


#9 posted 10-09-2018 09:05 PM

If degoose was still around he would be able to identify it and possibly advise on how it operated.

I missed the baby wipes I saw the watch though !... did you guys miss it? I will go back and take another gander for the baby wipes.

-- Regards Rob

View robscastle's profile

robscastle

6223 posts in 2624 days


#10 posted 10-09-2018 09:37 PM

OK I am back, this time I watched the complete video, then went looking for the machine.

I found it at:-

http://woodroleehyun.com the site shows it all.

It still looks a bit like a more advanced version of a Torque workcenter.

Interesting ball cutter never seen anything like that before, no doubt Pozzy has one in his workshop somewhere though.

Now back to the sanding I have someting similar but its on a hand held angle grinder/Sander I use it to remove paint from timber, and polish my Ute (with a lambswood pad I might add)...no NC for me sadly. From memory the base pad seen in the was about $65.
I will take a picture of it next time I get it out and post it for general interest or possibly just boring other LJs!

Its a big ass Art Deco looking cabinet (chest of drawers) , and timber wise looks to be Oak and Walnut (will accept knowledgable replies on it)

Setting it up with a roundover router bit with a bearing then using NC would require very precise positioning, to prevent run in or run out.
The drawer dovetails look impressive but are in practice reversed, and possibly this has been done for visual effect.

All very interesting work and I might just try one to see if I can do the same without the Complex gear.

Anyway back to the baby wipes, understanding what baby wipes are primarly intended for I assume a damp cloth would produce the same result. Mind you it is possibly a little more convinent.

Not forgetting the watch!

-- Regards Rob

View DS's profile

DS

3197 posts in 2840 days


#11 posted 10-09-2018 10:10 PM

I sure hope that is a Random Orbit head on there, otherwise, if it is just spinning around the spindle axis, there would lots of swirly scratches.

Also, I’m am not sure how effective this method will be. ROS is difficult to maintain proper pressure on an automated machine for proper sanding. Maybe his hand control of the spindle allows him an ability to govern pressure on the material. Too many unknowns going on here.

There are several automated ROS machines which are setup like a wide belt sander to pass material underneath them on a conveyor, but the two companies with which I’ve had experience on this type of machine, ultimately failed to succeed in keeping it running consistently.

The guy’s technique is rather interesting though, I’ll give him that.

-- "Hard work is not defined by the difficulty of the task as much as a person's desire to perform it.", DS251

View pottz's profile

pottz

5552 posts in 1404 days


#12 posted 10-09-2018 10:25 PM

sorry RC i dont have one of those…..yet! lol. no ill pass on that thing,looks expensive and would take up more space than i can afford.ill bet duckie has one in that space age shop of his?

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View bobasaurus's profile

bobasaurus

3599 posts in 3604 days


#13 posted 10-09-2018 10:38 PM

I don’t see this being much better than a standard ROS, and it must be a pain to setup.

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View Tony_S's profile

Tony_S

976 posts in 3502 days


#14 posted 10-09-2018 11:16 PM


Also, I m am not sure how effective this method will be. ROS is difficult to maintain proper pressure on an automated machine for proper sanding. Maybe his hand control of the spindle allows him an ability to govern pressure on the material.
- DS

I can’t speak for effectiveness the unit in the video, but sanding aggregates have been around for quite a few years. 10? Maybe longer? I looked into one about 7-8 years ago and from what I was told, the problems were exactly as you mentioned above.
I don’t doubt they’ve improved since then, but to what degree, I can’t say. Never did pursue the idea again.
They were bloody expensive, but I’m sure thats changed as well.
https://www.benz-tools.de/en/products/wood-composites/tooling-technologies/sanding-units

-- It is the mark of an educated mind to be able to entertain a thought without accepting it. Aristotle

View AlaskaGuy's profile

AlaskaGuy

5316 posts in 2729 days


#15 posted 10-10-2018 01:29 AM

I have to wonder how this one is hold up to wood movement, this is a lumber Jocks project.

-- Alaskan's for Global warming!

showing 1 through 15 of 22 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com