Grizzly Hybrid Table Saw with Incra Fence?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Andy59 posted 10-08-2018 02:57 PM 797 views 0 times favorited 5 replies Add to Favorites Watch
View Andy59's profile


7 posts in 2043 days

10-08-2018 02:57 PM

Topic tags/keywords: incra grizzly g0771z

I’m an occasional woodworker and just burned up my old Craftsman contractor table saw (20years) and looking at the Grizzly Hybrid table saw. I don’t see myself needing more motor than needed to cut 3/4 plywood or normally 1” oak. I would rather put my saved money on precision and that’s where the Incra fence comes in. Are these compatible, and any other thoughts are appreciated.

5 replies so far

View BroncoBrian's profile


894 posts in 2843 days

#1 posted 10-08-2018 03:06 PM


A less accurate and less stable saw with a more accurate fence? That would give you a very consistent less accurate and less stable table saw.

Most cabinet saws come with a good fence. At least that is not where they fail first.

-- A severed foot is the ultimate stocking stuffer.

View smitdog's profile


468 posts in 2990 days

#2 posted 10-08-2018 03:21 PM

The reviews say plenty of people think the Grizzly Hybrids are good saws and are probably plenty accurate. If you aren’t ripping 8/4 hardwood all day then the hybrid should do just fine. Can’t beat the repeatability of the Incra and if you ever do upgrade to a cabinet saw then you just reinstall the incra on it. Keep the hybrid’s fence so that you can sell it with the saw, it would help it sell quickly.

-- Jarrett - Mount Vernon, Ohio

View knotscott's profile


8386 posts in 4260 days

#3 posted 10-08-2018 05:29 PM

It’s hard to argue the Incra’s precision and accuracy, but is simply way more than many of us need to do good work. Since the Grizzly saws don’t offer the option to buy without the fence, I’d give the stock fence a go before buying the Incra.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Andy59's profile


7 posts in 2043 days

#4 posted 10-08-2018 06:27 PM

Thanks for the feedback. For my level I think the hybrid will be fine. Moving from a 20yo contractor saw I will probably be more than happy with the performance. Need something I can move around my small shop but still be quality. Think I’ll order it after the hurricane goes past us.

View WoodenDreams's profile


1163 posts in 795 days

#5 posted 10-08-2018 06:41 PM

For what you say you want the was for the Grizzly Hybred is a good choice to save money. I have good results on my G0771Z. plus it’s 120v, and don’t need to wire for 240v. You can build yourself several sleds for different purposes. and still get a accurate results.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics