LumberJocks

Double Sided V-Groove Router Bit?

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by pf_flyguy posted 10-04-2018 10:48 PM 449 views 0 times favorited 4 replies Add to Favorites Watch
View pf_flyguy's profile

pf_flyguy

2 posts in 2534 days


10-04-2018 10:48 PM

Topic tags/keywords: tongue and groove v-groove

I am making a bunch of Tongue and Groove Boards for exterior gates. The wood profile I am looking to achieve is:

I had hoped the Yonico 15227 Matched Tongue and Groove V-Notch Router Bit Set 1/2-Inch Shank would work and that I could just flip the boards to get the desired profile … unfortunately not

My boards are 1/2” and I have ended up doing multiple passes on the table saw at various angles to get the result I wanted.

Does anyone know of a router bit set that will achieve my desired profile?

Thanks.


4 replies so far

View Shamb3's profile

Shamb3

39 posts in 601 days


#1 posted 10-04-2018 11:40 PM

Why do those not work?
The tongue is 1/4 inch. So wouldn’t you just adjust that part to be 1/8th of an inch above the table? Then flip the boards as you described?

View gwilki's profile

gwilki

306 posts in 1894 days


#2 posted 10-05-2018 12:57 AM

I’m with Shamb3. I have that same set from Lee Valley and I’ve made miles of tongue and groove with it. What part of it does not work for you?

-- Grant Wilkinson, Ottawa ON

View 000's profile

000

2859 posts in 1319 days


#3 posted 10-05-2018 01:18 AM

The problem is the 1/2” material.
The tongue is 1/4” then there is a lip that looks to be 1/16 (or bigger). This doesn’t leave much for the bevel
You need a set up without the lip, since your using a Yonico bit look at this one for comparison.
(you would have to set up a fence for to cut the tongue because there is no bearing)
https://www.amazon.ca/Yonico-15223-Matched-Tongue-Banding/dp/B00KZM2AII

Why are you using 1/2” material? I would think 3/4” min.?

View pf_flyguy's profile

pf_flyguy

2 posts in 2534 days


#4 posted 10-05-2018 01:28 AM

evidently, Yonico have a “Small” V-groove set also. the tongue is 3/8 on this one

https://www.amazon.com/gp/product/B0711BJ2ZM/ref=oh_aui_search_detailpage?ie=UTF8&th=1

I will give this set a shot and see if I get better results

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com