LumberJocks

Boeshield T-9 safe for finishing?

  • Advertise with us

« back to Finishing forum

Forum topic by jdwhitak posted 09-12-2018 05:40 PM 439 views 0 times favorited 6 replies Add to Favorites Watch
View jdwhitak's profile

jdwhitak

16 posts in 490 days


09-12-2018 05:40 PM

Hello,

I’m a hand tool woodworker. I’ve decided to use Boeshield T-9 for rust prevention on my tools. Does anyone know if it will interfere with finishes? I typically use Danish oil, varnish and shellac for my finishes.

Thanks!


6 replies so far

View HokieKen's profile

HokieKen

10741 posts in 1617 days


#1 posted 09-12-2018 07:22 PM

I’ve never had any problem with it interfering with finish. I will say, I bought one can and tried it then switched back to paste wax. I find paste wax is a little more hassle to apply but it seems to be better at discouraging rust and is good deal less expensive.

-- Kenny, SW VA, Go Hokies!!!

View MrUnix's profile (online now)

MrUnix

7468 posts in 2677 days


#2 posted 09-12-2018 08:34 PM

T-9 is nothing more than paste wax with a little bit of mineral oil thrown in for good measure.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View Lazyman's profile

Lazyman

3873 posts in 1866 days


#3 posted 09-12-2018 08:57 PM

I’ve tried T-9 and never had any transfer to the wood. It does seem to take longer to dry than just plain past wax.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View jdwhitak's profile

jdwhitak

16 posts in 490 days


#4 posted 09-14-2018 08:12 PM



T-9 is nothing more than paste wax with a little bit of mineral oil thrown in for good measure.

Cheers,
Brad

- MrUnix

How do you know that?

View RPhillips's profile

RPhillips

1281 posts in 2315 days


#5 posted 09-15-2018 01:57 AM

I use T-9 on all my planes and never had an issue.

-- Rob - Indianapolis IN - Learning... one mistake at a time...

View therealSteveN's profile

therealSteveN

3602 posts in 1053 days


#6 posted 09-15-2018 07:18 AM


T-9 is nothing more than paste wax with a little bit of mineral oil thrown in for good measure.

Cheers,
Brad

- MrUnix

How do you know that?

- jdwhitak

My suggestion would be to actually contact them and ask about possible finishing implications. They are nice folks, and give prompt replies. It’s one way to get correct info, not just what someone thinks. I can say I’ve used their product, and never noted a problem with finishes, and I also agree with those saying they get as good a surface on a TS, and as good or better rust prevention with just Paste Wax.

Contact info here.

-- Think safe, be safe

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com