LumberJocks

Delta TS replacement motor?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Tedstor posted 09-08-2018 11:44 PM 786 views 0 times favorited 5 replies Add to Favorites Watch
View Tedstor's profile

Tedstor

1678 posts in 3083 days


09-08-2018 11:44 PM

I have a line on a Delta 34-444 contractor saw. However, it doesn’t come with a motor. I happen to have a motor from a craftsman 113/315 collecting dust in my garage. Any idea if the 113 motor would fit the Delta?


5 replies so far

View GR8HUNTER's profile

GR8HUNTER

6338 posts in 1163 days


#1 posted 09-08-2018 11:51 PM

would not know why it would not might have to drill other holes try it :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Tedstor's profile

Tedstor

1678 posts in 3083 days


#2 posted 09-09-2018 12:53 AM



would not know why it would not might have to drill other holes try it

Thanks. I’d have to drive over an hour each way to pick up the saw. I’d hate to go to all that trouble and find out the replacement motor was not compatible and/or could not be ‘nicely’ modified.

View Rich's profile

Rich

4693 posts in 1040 days


#3 posted 09-09-2018 01:15 AM

The motor mounts to a plate that is attached to the saw frame with a hinge. The weight of the motor is what provides the belt tension.

The critical component is that plate. If it’s missing, then you’ll have no choice but to buy a replacement (yeah, maybe you could rig something with plywood, but I wouldn’t risk it). As for the motor, assuming it has a base and can be bolted to a flat surface, it’ll work fine. Like Tony said, you might have to drill some holes, but it’ll work.

-- My grandfather always said that when one door closes, another one opens. He was a wonderful man, but a lousy cabinet maker

View knotscott's profile

knotscott

8302 posts in 3826 days


#4 posted 09-09-2018 01:27 AM

Make sure the replacement motor spins in the same direction too.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View EdDantes's profile

EdDantes

74 posts in 361 days


#5 posted 09-09-2018 08:55 PM


I have a line on a Delta 34-444 contractor saw. However, it doesn’t come with a motor. I happen to have a motor from a craftsman 113/315 collecting dust in my garage. Any idea if the 113 motor would fit the Delta?

- Tedstor

Many contractor saws use a standard 3450RPM TEFC motor on a NEMA 56 frame. Don’t know for sure, but I suspect this Delta is no different. If the motor bracket/plate is there, all you need is a motor with the above specs. Take a look on the motor plate for the one you have, and it should give you the frame type.

You could also “go big” and get a Leeson/Baldor 2hp which would likely be better than the original motor…but it’s going to run you $300-400. Alternatively you can find Chinese knockoffs for closer to $200 around the web (eBay, etc.). Durability may be questionable, but you’d still be making sawdust.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com