LumberJocks

Makita 2030 Planer-Jointer bearing replacement.

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Smitty316 posted 09-04-2018 01:28 PM 1640 views 0 times favorited 4 replies Add to Favorites Watch
View Smitty316's profile

Smitty316

18 posts in 2047 days


09-04-2018 01:28 PM

I’m rebuilding my Makita 2030 Jointer-Planer. I have both cutter heads out and took them to a machine shop so they could pull the old bearings and put new ones on. They did not know how to remove the pulley and bearing box (parts 311413-3 and 222059) on the planer cutter head. Is this pulley just pressed on? or is it threaded? They wont touch it until I have some info for them

Here’s a link to the pars list if that would help.

Thanks, Smitty

https://www.makita.ca/data/upload/tools/2030%20-%20Revised_parts_English.pdf


4 replies so far

View MrUnix's profile (online now)

MrUnix

7383 posts in 2584 days


#1 posted 09-04-2018 07:41 PM


(from this thread)

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View Smitty316's profile

Smitty316

18 posts in 2047 days


#2 posted 09-04-2018 07:56 PM

Does this picture mean that this pulley on the end of the planer head unscrews in a counter clockwise direction? If so, how do you grip it? I don’t see a place for a wrench of any kind.

Thanks, Smitty

View Smitty316's profile

Smitty316

18 posts in 2047 days


#3 posted 09-04-2018 10:20 PM

Just to clarify, I’m not trying to remove the pulley from the gear box, I’m trying to get the pulley off the end of the cutter head. The picture makes it look like it has a reverse thread, but there isn’t a place for a wrench of any kind. I’m still confused.

Thanks, Smitty

View MrUnix's profile (online now)

MrUnix

7383 posts in 2584 days


#4 posted 09-04-2018 10:23 PM

I have both cutter heads out and took them to a machine shop so they could pull the old bearings and put new ones on. They did not know how to remove the pulley and bearing box (parts 311413-3 and 222059) on the planer cutter head. Is this pulley just pressed on? or is it threaded? They wont touch it until I have some info for them

Just tell them it’s threaded as mentioned above, and they will know how to go about it.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com