LumberJocks

*** UPDATE ***what about this one ?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by GR8HUNTER posted 08-26-2018 03:26 AM 943 views 0 times favorited 18 replies Add to Favorites Watch
View GR8HUNTER's profile

GR8HUNTER

6225 posts in 1133 days


08-26-2018 03:26 AM

worth it or not :<))

https://www.facebook.com/marketplace/item/2374634689220661?surface=product_details

she is saying i could have it for $650.00 reason getting rid of it because it was her dads thought her husband would use it and he dont so what about 650.00 :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN


18 replies so far

View ralbuck's profile

ralbuck

6056 posts in 2687 days


#1 posted 08-26-2018 05:05 AM

I would check prices etc. of new ones in your vicinity. A hundred bucks mmore for the same saw NEW will easily be worth the difference.

It might be a bargain; but, do your research well to avoid a burn!

-- Wood rescue is good for the environment and me! just rjR

View EdDantes's profile

EdDantes

73 posts in 331 days


#2 posted 08-26-2018 09:59 AM

Way overpriced. This an early version of a hybrid saw. It’s basically one of their contractor saws enclosed to look like a cabinet saw. So while it will have better dist collection, it has a less powerful motor and (I’m pretty sure) table mointed trunions. The fence also isn’t the greatest.

For reference the Grizzly G0771Z is a similar concept but with left-tilt, a riving knife and a better fence for $845 new. I’d get that or a Rigid r4512 before I’d buy this, which will save you money. But really, if $800 is in your price range, you should be able to find a nice used Unisaw if you’re patient.

View LittleBlackDuck's profile

LittleBlackDuck

2854 posts in 1241 days


#3 posted 08-26-2018 10:56 AM



Way overpriced….
- EdDantes

By the sounds of E’D’, this could be a costly lemon…

-- If your first cut is too short... Take the second cut from the longer end... LBD

View knotscott's profile

knotscott

8297 posts in 3796 days


#4 posted 08-26-2018 11:55 AM

Ed described it well, and I agree it’s too much for a hybrid with the Jet basic contractor saw fence.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View EdDantes's profile

EdDantes

73 posts in 331 days


#5 posted 08-26-2018 10:24 PM


she is saying i could have it for $650.00 reason getting rid of it because it was her dads thought her husband would use it and he dont so what about 650.00 :<))

That’s probably “reasonable”—mostly because it looks to be in good shape—but still more than I’d pay. Were it my choice, I’d still go with the Rigid r4512 which is $50 cheaper. Not only for the above mentioned issues (left-tilt, riving knife), but also because you’ll end up with a service plan on a new purchase. If I were going to make an offer on that saw I’d probably say $500, knowing that I’m going to spend another $200-250 (at least) on a fence upgrade at some point. And even then, I’d still probably figure that the new Grizzly hybrid is a better option at $850 than this saw + fence for ~$750 all-in.

View bigJohninvegas's profile

bigJohninvegas

633 posts in 1883 days


#6 posted 08-26-2018 10:40 PM

I agree with Ed, way overpriced. I have the Ridgid R4512, And I have done several hundred dollars of upgrades to make it a good saw. I would not buy it again.
I did not know about Grizzly back in 2013 when I bought my Ridgid. I now own a Grizzly band saw that I am very happy with. And would buy a Grizzly table saw.

-- John

View robscastle's profile

robscastle

6223 posts in 2625 days


#7 posted 08-27-2018 09:04 AM

Whereabouts in your workshop are you thinking of putting all this “stuff”

-- Regards Rob

View GR8HUNTER's profile

GR8HUNTER

6225 posts in 1133 days


#8 posted 08-27-2018 01:28 PM



Whereabouts in your workshop are you thinking of putting all this “stuff”

- robscastle


well Rob to be honest my walker turner original motor finally gave out not to bad after 60 years of great service I currently do have the motor in repair shop waiting on estimate to fix it I love my WT saw except for throat hole it is a very bad design so I’m just looking around now while I have free time :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View GR8HUNTER's profile

GR8HUNTER

6225 posts in 1133 days


#9 posted 08-27-2018 01:35 PM



Whereabouts in your workshop are you thinking of putting all this “stuff”

- robscastle


but no fear I am awaiting Duckys SKI money to be rolling in any time now ROTFLMAO :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View LittleBlackDuck's profile

LittleBlackDuck

2854 posts in 1241 days


#10 posted 08-27-2018 02:11 PM


I am awaiting Duckys SKI money to be rolling in any time now ROTFLMAO :<))
- GR8HUNTER

I’m also ROTFing,

with MAO..

waiting for you waiting for my…

-- If your first cut is too short... Take the second cut from the longer end... LBD

View robscastle's profile

robscastle

6223 posts in 2625 days


#11 posted 08-27-2018 09:30 PM

Always keen to help out when I can!

The saw is a bit of an odd one, ... speaking of which how is the LPG lathe going!

You posssibly may not want to hear this but, I have actually got a 12” cabinet saw throwout from a school my son was working at (looks the same as the Jet) it’s better than my 10” contractors saw, so I am looking at disposing of the contractors saw.

Motors: I managed to kill a motor and thought I could get it repaired, but that was a fail as it turned out to be BER.

-- Regards Rob

View GR8HUNTER's profile

GR8HUNTER

6225 posts in 1133 days


#12 posted 08-27-2018 09:47 PM



Always keen to help out when I can!

The saw is a bit of an odd one, ... speaking of which how is the LPG lathe going!

You posssibly may not want to hear this but, I have actually got a 12” cabinet saw throwout from a school my son was working at (looks the same as the Jet) it s better than my 10” contractors saw, so I am looking at disposing of the contractors saw.

Motors: I managed to kill a motor and thought I could get it repaired, but that was a fail as it turned out to be BER.

- robscastle


lathe works fine :<))
I’m not lucky enuff to get that deal :<((
BER ?

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View robscastle's profile

robscastle

6223 posts in 2625 days


#13 posted 08-27-2018 11:39 PM

BER (Beyond Ecconomical repair) usually determined if the repair is about 70% of the new replacement cost

So for example if the motor is about $100 and repairs are going to be more than 50% and approach 70% or the same in dollars its BER.
External Labour accounts for anything from 20% upwards, so thats why you can repair items yourself and continue on.

For example my Ryobi ERT 1250 router failed yesterday (not a current model) replacement cost would be about $150 or there abouts.
I stripped it down identified a failed bearing, drove to the bearing shop 2klms away, returned and fitted the new bearing then continued on with what I was doing.

The bearing was $6.00.

The school tossed 2 x saws one had the panel cutting accs fitted, way too big for my driveway amazing the gear that gets hucked out.

Here is the ST 12

-- Regards Rob

View LittleBlackDuck's profile

LittleBlackDuck

2854 posts in 1241 days


#14 posted 08-28-2018 12:21 AM


.... throwout from a school my son was working at….
- robscastle

You lucky “dog” rc, the only hand-me-downs I inherit from my descendants’ institutions are,

  • Window bars
  • hand cuffs
  • solitary confinement cells
  • generous servings from a policeman’s baton.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View GR8HUNTER's profile

GR8HUNTER

6225 posts in 1133 days


#15 posted 08-28-2018 02:48 AM

yes RC YOU SUCK LMAO :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

showing 1 through 15 of 18 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com