Crushed Stone with 2 Part Epoxy?

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by docspencer posted 08-11-2018 04:10 PM 564 views 0 times favorited 4 replies Add to Favorites Watch
View docspencer's profile


406 posts in 2557 days

08-11-2018 04:10 PM

Can I use crushed stone with 2 part epoxy (system 3) for wood inlay in a table top?

4 replies so far

View Clarkswoodworking's profile


289 posts in 745 days

#1 posted 08-11-2018 04:19 PM

It’s what everyone uses for that type project
Just make sure you have the time to get it all set and ready before it sets up on you

View John Smith's profile

John Smith

2141 posts in 774 days

#2 posted 08-11-2018 04:27 PM

slow setting (30-60 minute) epoxy will give you ample time
to vibrate “most” of the air bubbles out of the mix.
quicker than 15-20 minutes could lead to less than satisfactory results.
not knowing how much space you are talking about, you could build
a “box” that will sit over the pour and use your shop-vac to remove
most of the trapped air.

-- I am a painter. That's what I do. I paint things --

View ArtMann's profile


1462 posts in 1428 days

#3 posted 08-12-2018 02:04 AM

A heat gun will cause the bubbles to rise and dissipate. When I think of slow setting epoxy, I think in terms of hours – not minutes.

View BurlyBob's profile


6932 posts in 2877 days

#4 posted 08-12-2018 02:14 AM

Thanks, gang. This is something I’ve been wondering about for some time. I’ve got an upcoming project and this info will really help.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics