LumberJocks

Build a bowl from a board

  • Advertise with us

« back to Designing Woodworking Projects forum

Forum topic by Ldc posted 08-07-2018 06:06 PM 298 views 0 times favorited 1 reply Add to Favorites Watch
View Ldc's profile

Ldc

14 posts in 1467 days


08-07-2018 06:06 PM

Has anyone built a bowl from a board using compound angles ( no turning). If so could you share any insight.


1 reply so far

View OSU55's profile

OSU55

2359 posts in 2409 days


#1 posted 08-07-2018 06:22 PM

I made a few. I did turn them after glueing but up to that point its the same process. Used a circle cutting jig on a bandsaw and tilted the table. Glued and clamped the saw kerf from the blade. Used titebond III. Lot of to sand and finish w/o turning but can be done. I may be able to get the dia and angles I used if needed. If you havent look up Ringmaster lathe. Should be info for angles and dia.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com