Cutting 45 v notch in a wood runner

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by scribble posted 07-22-2018 01:23 AM 441 views 0 times favorited 1 reply Add to Favorites Watch
View scribble's profile


222 posts in 2978 days

07-22-2018 01:23 AM

Topic tags/keywords: question tablesaw milling

I am trying to build the shop notes router lift and I for the life of me can’t get the v notch cut into the post guides. The sheet says to cut the v at 3/8 deep and to be 5/8 from the edge of the fence to the edge of the blade portion that pops through the table. I have cut several “X” patterns but these are not going to do me any good.

I appreciate anyones help as I can’t get my head around what I am doing wrong.

-- If you can't read it Scribble wrote it!! “Experience is merely the name men gave to their mistakes.”

1 reply so far

View 000's profile


2859 posts in 1676 days

#1 posted 07-22-2018 02:27 AM

Maybe watching Steve Ramsey build a similar one will help.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics