LumberJocks

Craftsman table saw 113.27520

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by jazzbass posted 06-28-2018 07:35 PM 676 views 0 times favorited 6 replies Add to Favorites Watch
View jazzbass's profile

jazzbass

2 posts in 390 days


06-28-2018 07:35 PM

Hello all,

I’m new here my nickname is Jazzbass. I’m retired from work and I’m a part time bass player. Now to my question. I have a 113.27520 table saw. The teeth on my “micro adjuster” for my fence are wiped out , see picture. Would anyone have a good gear or whole head they would like to get rid of?


6 replies so far

View JCamp's profile

JCamp

988 posts in 973 days


#1 posted 06-28-2018 07:49 PM

Would the parts happen to be available online? If no one here has one then u might have to hold out for a used one that’s being sold for parts on Cal,FB or eBay…... or upgrade to a newer one (since you have a good excuse now)

-- Whatsoever thy hand findeth to do, do it with all thy might

View DBDesigns's profile

DBDesigns

220 posts in 420 days


#2 posted 06-28-2018 08:12 PM

jazzbass
I have an old Delta bandsaw but I replaced the fence with one I bought from Peachtree Woodworking. I don’t remember how much it was but it couldn’t have been that bad or I wouldn’t have bought it.
Good luck

-- I remember when Grateful wasn't Dead

View DBDesigns's profile

DBDesigns

220 posts in 420 days


#3 posted 06-28-2018 08:17 PM

Sorry jazzbass. I brain gassed. Saw tablesaw after I posted. I would try Mcmaster Carr or maybe Granger for the gear. Also maybe replacementparts.com. There are tons of old Craftsman tablesaws on EBAY as well. Or you could fabricate one.
Best,

-- I remember when Grateful wasn't Dead

View knotscott's profile

knotscott

8298 posts in 3798 days


#4 posted 06-28-2018 08:45 PM

Any chance you can remove the gear and reinstall it backwards to make use of the good end?

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View jazzbass's profile

jazzbass

2 posts in 390 days


#5 posted 06-29-2018 05:31 PM



jazzbass
I have an old Delta bandsaw but I replaced the fence with one I bought from Peachtree Woodworking. I don t remember how much it was but it couldn t have been that bad or I wouldn t have bought it.
Good luck

- DBDesigns


DB thanks for your reply. I looked into Peachtree and my use them if I can’t find an orgional gear

View fivecodys's profile

fivecodys

1437 posts in 2058 days


#6 posted 06-29-2018 06:00 PM



Any chance you can remove the gear and reinstall it backwards to make use of the good end?

- knotscott

That’s what I was thinking too.

-- When you leave your shop for the night, make sure you can always count to 10.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com