LumberJocks

What did you make this weekend ?

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by Clarkswoodworking posted 05-31-2018 03:07 AM 867 views 0 times favorited 24 replies Add to Favorites Watch
View Clarkswoodworking's profile

Clarkswoodworking

289 posts in 550 days


05-31-2018 03:07 AM

A friend asked me to build her some planter boxes for a house she is selling
I knew of a nice scrap bin at a local fence company so I got 80% of the wood for free
Here they are
No plans Just started cutting and building
Scott


24 replies so far

View bandit571's profile

bandit571

23150 posts in 3099 days


#1 posted 05-31-2018 03:16 AM

Made a bed..

not much else..

-- A Planer? I'M the planer, this is what I use

View 000's profile

000

2859 posts in 1315 days


#2 posted 05-31-2018 03:44 AM

Progress on the wine room I am building.
Bottle display holders, and some of the columns.

Yesterday and today’s progress on legs for a bench that will have an upholstered seat and back.
Leg joints are all finger jointed and the rails are half lapped.

View Clarkswoodworking's profile

Clarkswoodworking

289 posts in 550 days


#3 posted 05-31-2018 04:12 AM

I like it !
Scott


Made a bed..

not much else..

- bandit571


View Clarkswoodworking's profile

Clarkswoodworking

289 posts in 550 days


#4 posted 05-31-2018 04:13 AM

That’s going to be a fun room
Would never get the wife out of there
Scott


Progress on the wine room I am building.
Bottle display holders, and some of the columns.

Yesterday and today s progress on legs for a bench that will have an upholstered seat and back.
Leg joints are all finger jointed and the rails are half lapped.

- jbay


View 000's profile

000

2859 posts in 1315 days


#5 posted 05-31-2018 04:20 AM

Here is a partial view.

View Clarkswoodworking's profile

Clarkswoodworking

289 posts in 550 days


#6 posted 05-31-2018 04:50 AM

Wow

View dhazelton's profile

dhazelton

2838 posts in 2713 days


#7 posted 05-31-2018 11:44 AM

Someone wanted a bar for a covered screen porch. Their house is in a converted barn and they wanted it to look rustic and be up on pipe legs because snow can blow into the space in the winter. They were putting the top on it themselves. They dictated the dimensions and I think it’s gonna be a little wobbly.

View Ron Aylor's profile

Ron Aylor

2649 posts in 1064 days


#8 posted 05-31-2018 12:57 PM

Good looking planters! I made a bit more progress on my Two-Tier Side Table.
 

View JCamp's profile

JCamp

985 posts in 967 days


#9 posted 05-31-2018 02:19 PM

These took a little more than a weekend but I got them all finished (minus the stain) this past weekend

Grape harbor

Two large raised vegetable garden beds

Small deck for beside the pool (the pool was another weekend project but it was as a blow up one I didn’t build it out of wood :)

-- Whatsoever thy hand findeth to do, do it with all thy might

View woodbutcherbynight's profile

woodbutcherbynight

5966 posts in 2825 days


#10 posted 06-01-2018 03:28 AM

Working on outside corner cabinet and drawers. Got the cabinet installed and leveled. Drawers built, and ready to install this weekend. May even get the fronts done.

-- Live to tell the stories, they sound better that way.

View woodbutcherbynight's profile

woodbutcherbynight

5966 posts in 2825 days


#11 posted 06-01-2018 03:29 AM



Here is a partial view.

- jbay

At the speed I work this would take me oh, say 220 years…...... LOL

-- Live to tell the stories, they sound better that way.

View woodbutcherbynight's profile

woodbutcherbynight

5966 posts in 2825 days


#12 posted 06-02-2018 02:34 AM



Good looking planters! I made a bit more progress on my Two-Tier Side Table.
 

- Ron Aylor

That’s a nice looking table.

-- Live to tell the stories, they sound better that way.

View BurlyBob's profile

BurlyBob

6265 posts in 2682 days


#13 posted 06-02-2018 02:59 AM

No way I can compete with you guys. Some amazing, fantastic work here! Totally gets my Juices flowing to make things! Please giving us some more motivation and amazing ideas!

View HTown's profile

HTown

114 posts in 1602 days


#14 posted 06-02-2018 09:42 AM

Im on vacation and planning my next project. It will be a Sideboard similar to Greene and Greene to go under the television. I finished drawing the joinery in sketchup and exporting the parts using Cutlist Bridge. Next step is to take it into Cutlist Plus and get ready for a trip to the lumberyard.

View Ron Aylor's profile

Ron Aylor

2649 posts in 1064 days


#15 posted 06-02-2018 01:13 PM

Good looking planters! I made a bit more progress on my Two-Tier Side Table.
 

- Ron Aylor

That s a nice looking table.

- woodbutcherbynight


Thank you very much! This is my first experience with carving…

showing 1 through 15 of 24 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com