Beadlock Pro 1/2" Router Bits

  • Advertise with us

« back to Jigs & Fixtures forum

Forum topic by Lsmith3023 posted 05-26-2018 01:13 AM 1572 views 0 times favorited 3 replies Add to Favorites Watch
View Lsmith3023's profile


17 posts in 776 days

05-26-2018 01:13 AM

I Bought a Beadlock Pro Loose Tenon kit some time ago. I haven’t used it very much until lately. I have the 1/4”, 3/8”, and 1/2” inserts. I bought the 3/8” Router bit at the same time. I am planning a project where I would like to use the 1/2” Tenons. I can buy the stock from Rockler but I have noticed that the !/2” router bit isn’t available.
My questions are :

1. Does anyone know if the 1/2” bit is still available from any source?
2. Is Rockler phasing out this product?

As would most folks I would love a Domino but I am a hobby woodworker and paying that much money for an occasional use item is not in my near future plans.

I’m also exploring the possibility of making the Tenon stock with my CNC Router. Anybody tried that?

3 replies so far

View Rich's profile (online now)


5619 posts in 1364 days

#1 posted 05-26-2018 01:54 AM

I believe it uses drill bits, so any 1/2” bit would do.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View Lsmith3023's profile


17 posts in 776 days

#2 posted 05-26-2018 02:08 AM

I was referring to the specialty router bits for making the Tenon stock.

View JRsgarage's profile


367 posts in 1284 days

#3 posted 05-26-2018 02:24 PM

When I bought the 3/8 bit, 1/4 and 1/2 was not available…few years ago

-- “Facts don't care about your feelings.” ..., Ben Shapiro

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics