LumberJocks

Craftsman 22114 table saw arbor pulley

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by CVN72 posted 05-13-2018 11:36 PM 345 views 0 times favorited 3 replies Add to Favorites Watch
View CVN72's profile

CVN72

13 posts in 434 days


05-13-2018 11:36 PM

Hi,

I’m cleaning up a craftsman 22114 saw I just bought and when I checked the alignment of the arbor pulley and motor pulley, it’s off by 1/8”-1/4”. How do I align these?

Thanks.


3 replies so far

View MrUnix's profile

MrUnix

7405 posts in 2618 days


#1 posted 05-13-2018 11:48 PM

Don’t know what a 22114 is, but usually it’s just loosen the set screw(s), move, re-tighten.

Cheers,
Brad

Edit: Found the manual… set screw is part #221 in the diagram – M5×12mm

-- Brad in FL - In Dog I trust... everything else is questionable

View CVN72's profile

CVN72

13 posts in 434 days


#2 posted 05-14-2018 12:28 PM

It looks like there is also a pin on the motor side of the pulley to prevent it from sliding towards the motor.

View CVN72's profile

CVN72

13 posts in 434 days


#3 posted 05-14-2018 12:46 PM

Unless the motor pulley is a single piece.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com