LumberJocks

WTT WTS: Veritas Carcass Rip Saw for Tenon Saw

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by trilogy posted 05-09-2018 07:22 PM 535 views 0 times favorited 2 replies Add to Favorites Watch
View trilogy's profile

trilogy

10 posts in 797 days


05-09-2018 07:22 PM

I bought the set of carcass saws (I’m keeping the XCut) to hold me over until I received my dovetail saw from Florip Toolworks. It was purchased in the middle of February this year and only used a handful of times.

Ideally I would like to trade for a larger tenon saw of some sort 3.5”+ cut depth 9-12 tpi Rip. I can do +/- cash but wouldn’t want to add too much. If this sits for awhile I would sell for $60 shipped CONUS. I will add photos tonight but it looks like new.

Pictures: https://imgur.com/a/wE6hoGf

Lee Valley Description:

These saws carry forward the same design principles we used to develop our innovative dovetail saws, adopting selected traits of traditional carcass saws and rendering them using innovative materials and modern manufacturing methods.
Typically used to cut joints in drawer runners, dividers, and stretchers (the framework or carcass of a piece), they are well balanced, maneuverable, and scaled for smaller work than a tenon saw.

Available in rip and crosscut versions. The 12 tpi rip saw has a 10° rake angle and an included angle of 60° for efficient cutting parallel to the grain. ~~The 14 tpi crosscut saw has a rake angle of 15°, an included angle of 60°, and teeth filed with alternating 15° bevels so they sever wood fibers rather than tear them.~~ The teeth on each have relatively minimal set, at only 0.003” per side.

Each saw has a molded spine that incorporates stainless-steel powder for weight, glass fiber for stiffness, and an advanced polymer binder. An over-molded blade and stainless-steel handle-mounting bolt create a solid blade/spine/mount assembly. A single brass fastener secures the hardwood handle. The open-grip handle, made larger than those of classic carcass saws, permits a comfortable, secure grip. The high-carbon steel blade, 11” long and 0.02” thick, has a cut depth of about 2-3/8”. Each saw is 16-3/8” long overall and weighs just under a pound. Offered individually or as a pair.


2 replies so far

View trilogy's profile

trilogy

10 posts in 797 days


#1 posted 05-23-2018 10:29 PM

Bump for price drop

View trilogy's profile

trilogy

10 posts in 797 days


#2 posted 06-01-2018 03:41 AM

added pictures

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com