Carter Guides on Rikon 10-325

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by tom2627 posted 04-03-2018 06:55 PM 475 views 0 times favorited 2 replies Add to Favorites Watch
View tom2627's profile


13 posts in 1209 days

04-03-2018 06:55 PM

Hello, I have a 14 inch Rikon bandsaw that for the most part I am happy with. I ordered a set of Carter guides as the original that Rikon supplied are grossly under designed and tedious to adjust. The installation of the upper guide was simple. I removed the table trunion and table to get better access to install the carter guides. Following their photos there is interference with the table trunion and I cannot get the bearings in the proper relationship to the blade. Wondered if anyone else worked through this?


2 replies so far

View wncguy's profile


471 posts in 2915 days

#1 posted 04-04-2018 01:48 PM

I have that model & changed to the Carter guides, also bought & have the stabilizer for use with bandsaw boxes. It’s been a while since I got them (3-4 years), but I do not recall any issues getting the lower guides in. I am sure I did not removed table & trunion.
Sorry I can’tr be of more help.
You may wish to contact tech support at Carter &/or Rikon.

-- Any man can be a father, but it takes someone special to be a Dad

View RDan's profile


131 posts in 2927 days

#2 posted 04-04-2018 03:01 PM

You, might want to call them. I know there was a difference based on the 14” model. I have the C-Man 14” version that only has the 7” resaw. I picked the wrong ones at a show, they sent the correct ones and a return label for the other set after talking with them. I do not remember if that was the issue or not. Dan

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics