LumberJocks

Craftsman 113.298720 arbor bearing

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by hkmiller posted 03-30-2018 05:13 PM 1425 views 0 times favorited 4 replies Add to Favorites Watch
View hkmiller's profile

hkmiller

139 posts in 501 days


03-30-2018 05:13 PM

Was given this saw yesterday and there is some play in the arbor.

So, I might need to replace the bearing.

I did some searches on this forum and web, and I came up with this item:

620210 ZZ C3 Nachi Bearing JAPAN 5/8 ID X 35mm X 11mm 6202-10 DOUBLE SHIELDED .625

Anybody here think this would be the one to get?

I got the Nachi brand for my 34-450 unisaw. I like the Japanese made bearing.

-- always something


4 replies so far

View MrUnix's profile

MrUnix

7405 posts in 2618 days


#1 posted 03-30-2018 05:55 PM

I know that many, if not most, of the old Emerson saws used bearings with 5/8” bores, so the 6202-5/8 is probably a good bet – however, I would yank the ones you have first before ordering just to make sure. And yes, Nachi is a quality bearing on par with any of the other top-tier bearing companies. For reference, I just ordered some a few weeks ago from Accurate Bearing for an Atlas/C-man drill press I’m restoring… and they were around $6 a piece… a bit more than the standard 6202 due to the odd I.D.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View hkmiller's profile

hkmiller

139 posts in 501 days


#2 posted 03-30-2018 06:02 PM



I know that many, if not most, of the old Emerson saws used bearings with 5/8” bores, so the 6202-5/8 is probably a good bet – however, I would yank the ones you have first before ordering just to make sure. And yes, Nachi is a quality bearing on par with any of the other top-tier bearing companies. For reference, I just ordered some a few weeks ago from Accurate Bearing for an Atlas/C-man drill press I m restoring… and they were around $6 a piece… a bit more than the standard 6202 due to the odd I.D.

Cheers,
Brad

- MrUnix

Brad, that’s a great price would that be the equivalent bearing of the one I posted in the original question

-- always something

View MrUnix's profile

MrUnix

7405 posts in 2618 days


#3 posted 03-30-2018 06:47 PM

Brad, that s a great price would that be the equivalent bearing of the one I posted in the original question
- hkmiller

Yes. Standard sealed 6202 with a 5/8” bore.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View hkmiller's profile

hkmiller

139 posts in 501 days


#4 posted 03-30-2018 07:00 PM



Brad, that s a great price would that be the equivalent bearing of the one I posted in the original question
- hkmiller

Yes. Standard sealed 6202 with a 5/8” bore.

Cheers,
Brad

- MrUnix

Great thanks for getting back

-- always something

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com