LumberJocks

help finding parts

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by jrthekid posted 03-23-2018 02:35 PM 241 views 0 times favorited 2 replies Add to Favorites Watch
View jrthekid's profile

jrthekid

8 posts in 1356 days


03-23-2018 02:35 PM

Topic tags/keywords: question

try to make this short, need new chuck for my old rockwell 32” 11-280 drill press sn gm 7311. went to you tube showed how to drop chuck by hitting something in the holes in front. when it did not drop , I turned to old school got my hammer and crowbar and got it out. but the shaft also. the chuck and shaft will not come apart. 1 is this right, 2 do I need a chuck with the shaft. or am I not doing this right. by the way if you look at my profile, I,m new to shop work.thank you for any help.


2 replies so far

View MrUnix's profile

MrUnix

7405 posts in 2618 days


#1 posted 03-23-2018 02:51 PM

According to the manual/parts diagram, that press uses a pretty standard Jacobs chuck with a JT-33 taper – it should pop off with a bit of persuasion. The spindle is also easily removable, but you certainly did it the wrong way :(

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View TheFridge's profile

TheFridge

10858 posts in 1905 days


#2 posted 03-23-2018 03:09 PM

Chuck wedges. They’re cheap. Or make your own with some scrap and a grinder.

They is usually a hole in the spindle to knock the arbor with chuck attached out with a wedge. Once that’s out. Then you separate with chuck wedges.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com