FS: Kawasei Dovetail Chisels

« back to Woodworking Trade & Swap forum

490 posts in 3907 days

03-07-2018 11:31 PM

I have the 6 pc. set of these from The Best Things:
http://www.thebestthings.com/newtools/japanese_bench_chisels.htm

Only used a handful of times. They are very nice chisels, but I find I am doing more paring work than chopping, and these are designed to be used with a mallet (or steel hammer). Since these are pretty much the only nice set of chisels I own at my bench, I’m hoping to sell them and get a set of Blue Spruce bench chisels.

Retails for $339. I’d like to get $250, plus I’ll throw in a custom made Walnut holder for them.

Thanks!

6 replies so far

caboxmaker home \| projects \| blog 280 posts in 1438 days #1 posted 03-08-2018 02:11 AM	Ben, going from $339 to ~$85 is quite a gap. You sure you want to do that?
Ben home \| projects \| blog 490 posts in 3907 days #2 posted 03-08-2018 02:15 AM	I’ll take more if you’re offering… I wasn’t sure what the demand for something like this would be and was erring on the side of offering a sweet deal. If I put them on the Bay, maybe I could squeeze a few more bucks out of it. But it’s a hassle.
Gittyup home \| projects \| blog 215 posts in 3007 days #3 posted 03-14-2018 09:06 PM	So did you really sell them for $85? -- tel
Ben home \| projects \| blog 490 posts in 3907 days #4 posted 03-14-2018 09:09 PM	No! Not sure where this confusion came from. I am asking $250, a savings of $89 over retail.
Michael home \| projects \| blog 48 posts in 1117 days #5 posted 03-21-2018 01:31 PM	$89?? You have yourself a buyer! I kid ;)
BikerDad home \| projects \| blog 347 posts in 4651 days #6 posted 03-21-2018 10:49 PM	What sizes?? -- I'm happier than a tornado in a trailer park! Grace & Peace.

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	13240
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2830
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	578
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	417
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1914
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	6397
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	7940
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	32939
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	334
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	6487
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1825
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	7309
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1647
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2644
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1273
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	5436
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2401
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	9685

	Author	Latest activity	New comments or replies since you last checked
Mixed Nuts Bowls	Bob A in NJ	04-11-2021 06:07 PM	sign in to get readership tracking
Handplanes Of Your Dreams, v2.0 - Sharp As Ever	Bertha	04-11-2021 06:05 PM	sign in to get readership tracking
Spinnekop (windmill) #18: Bekleding	JobK	04-11-2021 06:04 PM	sign in to get readership tracking
2021 Plane Swap	Dave Polaschek	04-11-2021 06:02 PM	sign in to get readership tracking
hollywoodladies's Profile	hollywoodladies	04-11-2021 05:55 PM	sign in to get readership tracking
Bookcases damage need fix	TheFatMexican	04-11-2021 05:53 PM	sign in to get readership tracking
Taper tenon handplane jig - for any reamer. (Post)	mafe	04-11-2021 05:53 PM	sign in to get readership tracking
Krenov Hand Tool Cabinet	sk416	04-11-2021 05:47 PM	sign in to get readership tracking
Shaper to make flooring	firefighterontheside	04-11-2021 05:43 PM	sign in to get readership tracking
Off-topic content. Click to see the post.	Rick Dennington	04-11-2021 05:40 PM	sign in to get readership tracking

FS: Kawasei Dovetail Chisels

6 replies so far

Have your say...

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Mixed Nuts Bowls

Handplanes Of Your Dreams, v2.0 - Sharp As Ever

Spinnekop (windmill) #18: Bekleding

2021 Plane Swap

hollywoodladies's Profile

Bookcases damage need fix

Taper tenon handplane jig - for any reamer. (Post)

Krenov Hand Tool Cabinet

Shaper to make flooring

Off-topic content. Click to see the post.

FS: Kawasei Dovetail Chisels

6 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...