LumberJocks

Freud Dado Stack Spacer

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by EdsCustomWoodCrafts posted 03-07-2018 12:17 AM 837 views 0 times favorited 12 replies Add to Favorites Watch
View EdsCustomWoodCrafts's profile

EdsCustomWoodCrafts

928 posts in 1796 days


03-07-2018 12:17 AM

Topic tags/keywords: dado stack dado stack spacer 18” freud sd208 replacement tablesaw

Hi Everyone,

I own the Freud 8” dado stack SD208 and I lost one of the 1/8” spacers .. I looked online and on the owners manual and sell everthing except the spacers

Does anyone know where to get them I need one that fits a 5/8” arbor

Thanks

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com


12 replies so far

View WhyMe's profile

WhyMe

1169 posts in 2014 days


#1 posted 03-07-2018 12:45 AM

Call Freud Tools and see if they can send you one.

View GR8HUNTER's profile (online now)

GR8HUNTER

6344 posts in 1166 days


#2 posted 03-07-2018 12:51 AM

View EdsCustomWoodCrafts's profile

EdsCustomWoodCrafts

928 posts in 1796 days


#3 posted 03-07-2018 01:39 AM



https://www.amazon.com/Freud-SS100-Precision-Shim-Sets/dp/B0000223O7

hope this helps you out Ed :<))

also : https://www.woodcraft.com/products/freud-ss100-precision-shim-set
http://www.acmetools.com/shop/tools/freud-ss100

- GR8HUNTER

Thanks buddy but these are shims I need the spacers circle in the below picture

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com

View Steve's profile

Steve

1502 posts in 1036 days


#4 posted 03-07-2018 04:26 AM

Could you just get a 1/8” washer and drill a 5/8” hole for the Arbor?

I’d try Freud first though.

View GR8HUNTER's profile (online now)

GR8HUNTER

6344 posts in 1166 days


#5 posted 03-07-2018 02:37 PM

SORRRY :<((

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Robert's profile

Robert

3482 posts in 1934 days


#6 posted 03-07-2018 03:11 PM

I have a Freud set but it didn’t come with spacers.

It does, however come with 5 chippers.

Maybe you could find some of those?

-- Everything is a prototype thats why its one of a kind!!

View Steve's profile

Steve

1502 posts in 1036 days


#7 posted 03-07-2018 04:05 PM

machine shop could also probably make one in about 2 mins.

View EdsCustomWoodCrafts's profile

EdsCustomWoodCrafts

928 posts in 1796 days


#8 posted 03-08-2018 02:34 AM



I have a Freud set but it didn t come with spacers.

It does, however come with 5 chippers.

Maybe you could find some of those?

- rwe2156


Chippers wouldnt work because they a 3 times thicker

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com

View EdsCustomWoodCrafts's profile

EdsCustomWoodCrafts

928 posts in 1796 days


#9 posted 03-08-2018 02:35 AM



SORRRY :<((

- GR8HUNTER

No worries

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com

View Rayne's profile

Rayne

1215 posts in 1993 days


#10 posted 03-08-2018 05:51 AM

This may sound stupid, but could you buy 2 sets of the shims, use all 6 of the .02 shims and 2 of the .012 to get .124, which is pretty darn close to 1/8”. Not ideal, but is an alternative.

View Fred Hargis's profile

Fred Hargis

5647 posts in 2947 days


#11 posted 03-08-2018 11:49 AM


Chippers wouldnt work because they a 3 times thicker

- EdsCustomWoodCrafts

I’m a little confused, though that’s often the case. The thickest chippers I’ve seen are 1/8”, and that’s the size of the spacers you want (?). One another note, I did see some dado sets had replaced the chippers with spacers I didn’t Freud was one of the companies that did it.

-- Our village hasn't lost it's idiot, he was elected to congress.

View EdsCustomWoodCrafts's profile

EdsCustomWoodCrafts

928 posts in 1796 days


#12 posted 03-08-2018 06:01 PM

My bad the spacers are 1/16” thick

Chippers wouldnt work because they a 3 times thicker

- EdsCustomWoodCrafts

I m a little confused, though that s often the case. The thickest chippers I ve seen are 1/8”, and that s the size of the spacers you want (?). One another note, I did see some dado sets had replaced the chippers with spacers I didn t Freud was one of the companies that did it.

- Fred Hargis


-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com