Dado Gauge ... New You-tube

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by CharlesNeil posted 02-26-2018 12:32 PM 721 views 0 times favorited 7 replies Add to Favorites Watch
View CharlesNeil's profile


2495 posts in 4319 days

02-26-2018 12:32 PM

Short and to the point .. really simple and helpful for processing lumber

7 replies so far

View Monte Pittman's profile

Monte Pittman

30407 posts in 2786 days

#1 posted 02-26-2018 01:06 PM

Good tip sir

-- Nature created it, I just assemble it.

View tinnman65's profile


1387 posts in 3862 days

#2 posted 02-26-2018 11:58 PM

Great tip Charles!

-- Paul--- Creativity is allowing yourself to make mistakes. Art is knowing which ones to keep. — Scott Adams

View Knockonit's profile


595 posts in 650 days

#3 posted 02-27-2018 12:04 AM

had one of these in the cabinet shop, dang mm plywood, seemed no one could get it right half the time, so we made one for silly mm, and imperial
good idea, all should have one on stand by, especially as ones eyes go south some. hehe, that golden year crap.

View runswithscissors's profile


3057 posts in 2473 days

#4 posted 02-27-2018 02:27 AM

Don’t have one, but if I did, I’d add info as to which chippers and/or shims to use to make up a stack of that size.

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View Rich's profile


4681 posts in 1038 days

#5 posted 03-07-2018 04:32 AM

Great video, Charles. This is one of those tips that shows up in the woodworking magazines every couple of years. But leave it to you to make it your own. You rock!

From the April, 2006 issue of Fine Woodworking:

-- My grandfather always said that when one door closes, another one opens. He was a wonderful man, but a lousy cabinet maker

View GR8HUNTER's profile (online now)


6322 posts in 1161 days

#6 posted 03-07-2018 02:28 PM


-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View lew's profile


12821 posts in 4204 days

#7 posted 03-07-2018 08:59 PM

Don t have one, but if I did, I d add info as to which chippers and/or shims to use to make up a stack of that size.

- runswithscissors

Excellent suggestion

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics