Using Famowood Glaze Coat

  • Advertise with us

« back to Finishing forum

Forum topic by slick848 posted 02-25-2018 01:05 AM 952 views 0 times favorited 2 replies Add to Favorites Watch
View slick848's profile


1 post in 869 days

02-25-2018 01:05 AM

Hi everyone,im new to this so here it goes,I just put a coat of Glaze Coat on my guitar body,and when it cured it had dimples and minor other scratches and bubbles,is their anyway to get it smooth after it has cured other than taken it all off and starting over,is their an easier way Thanks Wayne

2 replies so far

View Monte Pittman's profile

Monte Pittman

30552 posts in 3116 days

#1 posted 02-25-2018 01:35 AM

After it’s cured, very few options. Getting rid of bubbles and such has to be done right after the pour.

-- Nature created it, I just assemble it.

View Lazyman's profile


5455 posts in 2165 days

#2 posted 02-25-2018 05:14 PM

You will probably have to sand it down and redo. What kind of wood is it? This happens a lot with porous woods and you have to do a thin seal coat first and then do a thicker one on top. This is probably explained in the instructions. Bubbles are also more likely if the temperature is cool—below 70 F.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics