Laguna Fusion Riving Knife Adjustment

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Hermit posted 01-22-2018 12:21 AM 547 views 0 times favorited 1 reply Add to Favorites Watch
View Hermit's profile


241 posts in 2170 days

01-22-2018 12:21 AM

My knife has moved out of adjustment. I am working with a brand new factory knife. There’s nothing in the manual explaining how to adjust it and couldn’t find any videos on YouTube. Anyone had to do this yet? Know how to do it?

-- I'm like the farmer's duck. If it don't rain, I'll walk.

1 reply so far

View mvegas's profile


5 posts in 1068 days

#1 posted 07-06-2020 10:13 PM

My response is over 2 years too late for Hermit’s question, but in case someone else experiences the problem, here is some information. I’ve also had my F2 riving knife go out of alignment, sitting too far right of the blade. My manual (dated 10/2018) also omits any mention on how to adjust the riving knife. I did, however, find some written instructions on a Laguna website in the UK with some instruction:

Basically, raise your blade all the way and you’ll see 6 set screws configured like the spots on a dice. Loosen the two middle screws, which fasten the assembly in between the set screws and the arbor block. Then, make small adjustments to the other four set screws. I found that the bottom two set screws were quite loose and tightening them up put the knife in the proper position.

I hope the newer Laguna owner’s manuals provide better instructions on this important adjustment. It creates a dangerous situation when the riving knife gets out of alignment and you try to nudge the knife or force the wood while making a rip cut. Better to take the time to figure out how to align the knife.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics