Best "value" TS blase for making box joints

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Dwain posted 01-17-2018 07:37 PM 493 views 0 times favorited 4 replies Add to Favorites Watch
View Dwain's profile


618 posts in 4706 days

01-17-2018 07:37 PM

Topic tags/keywords: box joint jig table saw blade

I’d like to start making box joints. I am without a router table at this time so I have to use a table saw. I believe this will necessitate the purchase of a new blade that can create flat bottomed kerfs. I don’t want to spend a ton of money, so I’d like some suggestions as to a good “value” choice.

Thanks to all!

-- When you earnestly believe you can compensate for a lack of skill by doubling your efforts, there is no end to what you CAN'T do

4 replies so far

View TheFridge's profile


10861 posts in 2333 days

#1 posted 01-17-2018 07:47 PM

Look up the William Ng box joint jig on YouTube. It works great.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View Gilley23's profile


489 posts in 1229 days

#2 posted 01-17-2018 08:13 PM

As simple as it gets:

View brtech's profile


1068 posts in 3769 days

#3 posted 01-17-2018 08:28 PM

View knotscott's profile


8385 posts in 4223 days

#4 posted 01-17-2018 08:39 PM

There are several 24T rip blades that have a flat top grind (FTG) that will work. Best bang for the buck in a full kerf blade is likely the Delta 35-611

Otherwise, you may need to look into a box joint cutter set, or use an FTG chipper from a dado set.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics