Stacked Dado for your router...

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by richardchaos posted 10-27-2017 02:29 PM 752 views 0 times favorited 4 replies Add to Favorites Watch
View richardchaos's profile


583 posts in 1261 days

10-27-2017 02:29 PM

I was looking around on Amazon for a 1/4 inch slot cutting router bit and ran across this. VERY COOL. Now if it came with a set of different depth cutting bearings it would be perfect!

-- “In a time of universal deceit, telling the truth is a revolutionary act.” ― George Orwell

4 replies so far

View dschlic1's profile


490 posts in 2851 days

#1 posted 10-27-2017 05:59 PM

You might be able to use the bearings from a rabbeting bit.

View davezedlee's profile


60 posts in 1707 days

#2 posted 10-28-2017 12:25 AM

Yonicos are pretty hit and miss IMO

might be worth a try, but i don’t have a lot of faith in their bearing bits

that’s my video… the replacement came with a crappy bearing, but i subbed out one of my others so decided to keep it

Amazon only allows uploading one video, but the second one from overhead shows the bearing threaded off center AND off-axis (89.5 degrees)


View TungOil's profile


1383 posts in 1377 days

#3 posted 10-28-2017 01:32 AM

I have this set:

you can order a bearing set with different diameter bearings. Not the highest quality but for the minimum amount of slot cutting I do with the router it has served me very well.

-- The optimist says "the glass is half full". The pessimist says "the glass is half empty". The engineer says "the glass is twice as big as it needs to be"

View runswithscissors's profile


3118 posts in 2907 days

#4 posted 10-28-2017 02:26 AM

I sure wouldn’t want to use the entire stack with that wimpy little 1/4” shank. Scary!

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics