Fun lumber ID quiz #6

1477 posts in 2000 days

09-16-2017 04:49 PM

Here we go again everyone.

This is a very hard wood with amazing grain and figure. Again, this one will have to be a specific common name as it is a large family like the previous wood listed.

Same rules as before, 1 guess per post and if you think you’re not allowed to guess you’re probably right, haha.

Good luck everyone. I hope everyone is having fun with this. I know I’m learning a lot more than possibly could have.

40 replies so far

bigblockyeti home \| projects \| blog 6577 posts in 2497 days #1 posted 09-16-2017 04:52 PM	Silver maple? -- "Lack of effort will result in failure with amazing predictability" - Me
AZWoody home \| projects \| blog 1477 posts in 2000 days #2 posted 09-16-2017 04:53 PM	And we’re off… And, no…
HokieKen home \| projects \| blog 14072 posts in 1915 days #3 posted 09-16-2017 05:02 PM	Acacia? -- Kenny, SW VA, Go Hokies!!!
TheFridge home \| projects \| blog 10859 posts in 2262 days #4 posted 09-16-2017 05:55 PM	Alder! Heartwood looks like meranti. -- Shooting down the walls of heartache. Bang bang. I am. The warrior.
AZWoody home \| projects \| blog 1477 posts in 2000 days #5 posted 09-16-2017 06:20 PM	Alder! Heartwood looks like meranti. - TheFridge Alder was already #4 remember? haha
HokieKen home \| projects \| blog 14072 posts in 1915 days #6 posted 09-16-2017 08:01 PM	Red Gum Eucalyptus -- Kenny, SW VA, Go Hokies!!!
TaySC home \| projects \| blog 270 posts in 1110 days #7 posted 09-16-2017 08:03 PM	I don’t have enough experience on the subject to hazard a guess.
TheFridge home \| projects \| blog 10859 posts in 2262 days #8 posted 09-16-2017 08:12 PM	Dysoxylum mollisimum -- Shooting down the walls of heartache. Bang bang. I am. The warrior.
HokieKen home \| projects \| blog 14072 posts in 1915 days #9 posted 09-16-2017 08:15 PM	What’d you call me Fridge?! -- Kenny, SW VA, Go Hokies!!!
russde home \| projects \| blog 108 posts in 3616 days #10 posted 09-16-2017 08:16 PM	Mesquite
Desert_Woodworker home \| projects \| blog 2793 posts in 1991 days #11 posted 09-16-2017 08:19 PM	Red Bean Dysoxylum mollissimum, commonly known as red bean, is a tree in the family Meliaceae. The specific epithet mollissimum is from the Latin meaning “very soft”, ... -- Desert_Woodworker
TheFridge home \| projects \| blog 10859 posts in 2262 days #12 posted 09-16-2017 08:23 PM	the Latin meaning “very soft”, ... - Desert_Woodworker Only for the first minutes hear it work hardens. -- Shooting down the walls of heartache. Bang bang. I am. The warrior.
builtinbkyn home \| projects \| blog 3009 posts in 1717 days #13 posted 09-16-2017 08:56 PM	Arizona cypress. -- Bill, Yo!......in Brooklyn & Steel City :)
pontic home \| projects \| blog 797 posts in 1385 days #14 posted 09-16-2017 09:51 PM	Red South American Mullberry, -- Illigitimii non carburundum sum
AZWoody home \| projects \| blog 1477 posts in 2000 days #15 posted 09-16-2017 09:58 PM	Not yet…

View all replies »

showing 1 through 15 of 40 replies

show next 15 replies

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	12932
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2689
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	538
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	393
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1769
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	6030
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	7622
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	31645
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	296
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	6202
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1718
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	7051
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1575
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2512
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1253
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	5274
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2373
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	9497

	Author	Latest activity	New comments or replies since you last checked
Maple Vessel	Julian	07-11-2020 09:44 PM	sign in to get readership tracking
Stumpy Nubs Woodworking Journal- A truly unique online publication (part 5)	StumpyNubs	07-11-2020 09:39 PM	sign in to get readership tracking
Nickel plating outsourcing	DouginVa	07-11-2020 09:38 PM	sign in to get readership tracking
Wooden Tractor and Manure Spreader	woodchip1	07-11-2020 09:38 PM	sign in to get readership tracking
Going Loco	diggerdelaney	07-11-2020 09:37 PM	sign in to get readership tracking
Simple Walnut Hollow Form	lew	07-11-2020 09:37 PM	sign in to get readership tracking
Off-topic content. Click to see the post.	pottz	07-11-2020 09:30 PM	sign in to get readership tracking
2020 Backyard BBQ swap	Dave Polaschek	07-11-2020 09:30 PM	sign in to get readership tracking
Tote and know refinish	GrumpyGolfGuy	07-11-2020 09:22 PM	sign in to get readership tracking
NateNesta's Profile	NateNesta	07-11-2020 09:03 PM	sign in to get readership tracking

Fun lumber ID quiz #6

40 replies so far

Have your say...

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Maple Vessel

Stumpy Nubs Woodworking Journal- A truly unique online publication (part 5)

Nickel plating outsourcing

Wooden Tractor and Manure Spreader

Going Loco

Simple Walnut Hollow Form

Off-topic content. Click to see the post.

2020 Backyard BBQ swap

Tote and know refinish

NateNesta's Profile

Fun lumber ID quiz #6

40 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...