Greetings all! I have a Jet contractors saw I purchased back in the late 90's. Stupidly, I did not get the cast iron wings when they were available. I did purchase an accufence (edit - Accusquare) and router table add on (which was one of the best purchases I've ever made!) so I really only need one for the left side of the saw.
I recently purchased the Incra Miter 5000 and I'm thinking I really want to have a truly solid surface on that side of the saw now, but after contacting Jet customer support, they only have replacement stamped metal wings, the cast iron wings have been discontinued. I've scoured the internet looking for one but can't seem to find it anywhere.
So if anyone here has a wing they'd be willing to share or if someone knows of an after market part that would work, please let me know.
Model - JWTS-10
Stock - 708471 (this apparently did matter as there were different stock models)
I think several places (benchdog is one, if I recall) sell cast iron extensions that have router table inserts in them - maybe that would be an option for you?
my Delta contractor saw has the stamped wings, too…
Tom
Well, i read too fast and just noticed you have a router extension already…
I have a Delta wing I need to find a home for - I replaced it with a shop-made router table, and I don't think I'll ever go back. It's 27" and fits a Contractor saw, but I think the holes are fairly standard even across brands.
I have the Jet JWTS-10, #708471 saw. I put a BenchDog router wing on the left side and I put a Sawstop cast wing on the right (required drilling a few new holes).
I realize this is a VERY old post but…...I have the same issue. I'm in need of one (at minimum) or two cast iron wings for a Jet Contractors Saw circa 2000. Does anyone know of a source, or someone that has one (or two) that they would part with.
I realize this is a VERY old post but…...I have the same issue. I m in need of one (at minimum) or two cast iron wings for a Jet Contractors Saw circa 2000. Does anyone know of a source, or someone that has one (or two) that they would part with.
You should be able to make just about any 27" deep cast iron wings work….some drilling might be required. The wings from a similar style GI, PM, Bridgewood, Woodtek, Grizzly, or Shop Fox saw could be direct bolt-ons. You could always try Jet for an exact match. You could also try Saw Stop for a less exact match that might require drilling.
Nadiboris, that is exactly what a robot would say….....
I actually have the same saw and want to do the same thing. I had never thought that about trying different manufacturers. That's a friggin brilliant idea.
They are out there though. I have the original part number around here somewhere. I will find it and post it. That can help you loads in your searches.
I just checked with SawStop. They have a 2-pack. The wings are 10"x27" so they should be the right size. Look on their website at their contractor model. The wings are extras available. A sales rep confirmed. I'll probably have to order from Rockler as they don't sell direct.
Luthierman, no not yet. I'll wait and order them when I get back off of a trip to Thailand and Indonesia next month. Like I said in an earlier post, you'll have to go through a dealer to get them. SawStop doesn't sell retail. But for the size, I think I can deal with any irregularities. I'll post to the group when I do get them. And photos.
And, I finally ordered them. They'll be here in a week. Because of the weight (I'm assuming) there is an additional $30 shipping charge. I can deal with this. I'll let you know how it works out.
OK, it's been six months since my last update. I got the cast iron wings from Sawstop. Finally got my table saw out of storage and….wait for it…..none of the holes match up. Am I surprised? No, my table saw is a Jet and the wings come from SawStop. No problem, drill some holes. I'm a woodworker, not a machinist. So I have some questions:
1. Do I need a special bit of any sort to drill a 5/16" (about) hole in 1/8" thick cast iron?
2. It may sound dumb but is there some specific speed I should be using? slow, very slow, come back next week to check progress, etc.
3. It's a metal so I'm assuming a lubricant of some sort is necessary. Any suggestions as to what?
Yeah, I know, dumb questions all, but I can't help it.
Cast Iron is soft in comparison to cutting other metals. Get a carbide drill bit, use cutting fluid as a lubricant, but if you dont have any and dont want to buy some, use 3 in 1, WD-40…anything at all is better than nothing. You don't want to fire away with your hand drill at its fastest setting, you generally want to go slower. Many people have recommended starting a small hole first, then switching to the correct sized drill bit. An extension table probably isnt the easiest thing to get under a Drill Press, but maybe if you have a floor model you can…. wing it? (see what I did there)
You have insufficient privileges to reply here.
Related Threads
?
?
?
?
?
LumberJocks Woodworking Forum
2.5M posts
96K members
Since 2006
A forum community dedicated to professional woodworkers and enthusiasts. Come join the discussion about shop safety, wood, carpentry, lumber, finishing, tools, machinery, woodworking related topics, styles, scales, reviews, accessories, classifieds, and more!