Bad Axe Frame Saw and Kerfing Plane Blades, Stanley No 50 Plane, Stanley No 150 Miter Box, plus more

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by nurvreck posted 06-12-2017 01:16 AM 1783 views 0 times favorited 3 replies Add to Favorites Watch
View nurvreck's profile


80 posts in 3474 days

06-12-2017 01:16 AM

Topic tags/keywords: bad axe frame saw kerfing plane stanley no 150 stanley no 50 bridge city chopstick master for sale

EDIT: Only frame saw and kerfing plane blades still available

Some more tools from cleaning out my shop.

Bad Axe Frame Saw and Kerfing Plane Blade Blades plus Kerfing Blade Hardware

When Mark first released his frame saw and kerfing plane blades I jumped on it. Unfortunately that’s all I ever did and these have been just sitting in the back of my tool chest. They need a better home. At the time I don’t think he was offering the rest of the hardware as he does now and only the blades and kerfing plane fasteners are offered. I cannot find my purchase email and the website doesn’t have the setup I’m offering but looking for $115 with shipping in the US.


Stanley No. 50 Combination Plane with 17 Cutters

A beautiful Stanley No 50 combination plane! To my knowledge set is complete and has all 17 cutters in cardboard box, please see photos and ask questions. Most blades still have factory sharpening and only a few have had backs lapped and sharpened. User would benefit from resharpening per their personal preference. Handle does have cracks and was purchase like that knowingly, does not affect tools ability to perform.

I am selling because I am cleaning out my shop and this has just been collecting dust. Currently have it on eBay for $175 with OBO.


Stanley No. 150 Miter Box – “Restored” by me

I purchased off eBay and restored this per my preferences. I didn’t buy to resell but as I am cleaning out the shop and gathering everything that deserves a better home I have to add this as well. Miter box is complete to the best of my knowledge so please view all photos and ask questions.

Looking for $100 shipped within the contiguous US.


Stanley No. 150 Miter Box – Needs Restoring

Since I actually had as much fun restoring my first Stanley miter box I figured I’d give another one a shot. Unfortunately either I didn’t read the full description or the description was inaccurate but this does not have the spring bar where the saw goes (bought at least 3 years ago because no longer in my eBay history). I did buy without the wheel guard on the back though and there is no screw for it. I started my restoring adventure with sand blasting this one but in the middle the blaster I was using broke so I never continued with the project. To my knowledge all other parts are accounted for so please review images and ask questions. Part of center screw is broken on bottom but does not affect it in any way.

Looking for $60 shipped within the contiguous US.


Bridge City Tool Works Chopstick Master (2015 version)

ORIGINAL 2015 Version of Bridge City Tool Works’ Chopsticks Master which has been discontinued and is no longer available. Please see their website for differences between this 1st Gen model and their current one in production. Overall set as a whole is new with only the plane blade being sharpened and test cut. All blanks are untouched and still in original box.

From Bridge City website:

The Chopstick Master™ allows anybody, regardless of experience, age 8 and up, to make a pair of gallery quality chopsticks.

The Chopstick Master™ includes the following:
• Chopstick Master Base Unit
• Red Arm for 5mm Chopsticks
• Green Arm for 2mm Chopsticks
• Crosscut Sliding Table with Depth Stop
• Crosscut Saw Blade
• (2) Red Clamping Wedges
• Sharpening Abrasive Strip
• Mini Block Plane with Depth Skids
• 30° Mini Honing Guide for Plane Iron
• (10) Fabric Chopstick Sleeves
• (4) Cherry Chopstick Blanks
• (4) Maple Chopstick Blanks
• (4) Padauk Chopstick Blanks
• (4) Walnut Chopstick Blanks
• (2) Ceylon Iron Wood Chopstick Blanks
• (2) Teak Chopstick Blanks
• Food Grade Chopstick Oil

Manual also included


-50° Mini Honing Guide and 50° Plane Iron, Unused in plastic box
-Flat Stock Arm – will allow you to thickness plane banding, inlay strips, and other thin stock requirements down to .06″ thick. This blue arm is great for kumiko components, too. (not in original plastic sleeve but will wrapped and placed in box)

I know I’m not going to get close to what I paid for this. When originally released it was $360 (still have my email conformation). Now the 2015 version is $249 on their website (not available, just a reference) with the new version (for pre-order) is $195. With the added blade and flat arm stock I’m looking for $300 with shipping in the contiguous US. Currently on eBay for same price but plus shipping.

-- Dan, SSgt/USMC, Yuma, AZ

3 replies so far

View straightsix240's profile


2 posts in 818 days

#1 posted 10-24-2017 03:12 PM

Is the restored Stanley 150 still available?

View nurvreck's profile


80 posts in 3474 days

#2 posted 10-24-2017 03:16 PM

No, sorry this was not updated. The only things still available are the frame saw and kerfing blades.

-- Dan, SSgt/USMC, Yuma, AZ

View straightsix240's profile


2 posts in 818 days

#3 posted 10-25-2017 12:23 PM

Thanks anyway!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics