Zar Polyurethane coat over Minwax Polyurethane coat ?

  • Advertise with us

« back to Finishing forum

Forum topic by Fax posted 06-01-2017 05:35 AM 1175 views 0 times favorited 2 replies Add to Favorites Watch
View Fax's profile


62 posts in 1234 days

06-01-2017 05:35 AM

Hello friends!
First of all, allow me to thank you all for helping me in this wonderful and expensive hobby of refinishing furniture.
I am so grateful for you all.

I applied a coat of Minwax polyurethane on a cabinet but I ran out of it.
I have some Zar Polyurethane, enough to finish the cabinet doors.
Is it ok to apply different polyurethane brands over each other ?


-- Julian Paul Jones

2 replies so far

View Fred Hargis's profile

Fred Hargis

6249 posts in 3271 days

#1 posted 06-01-2017 11:14 AM

You will be fine, do the usual, scuff sand before the next coat. Also check the finishing windows on both products. They are sometimes listed as “recoat within x hours, or after y hours”.

-- Our village hasn't lost it's idiot, he was elected to congress.

View Fax's profile


62 posts in 1234 days

#2 posted 06-02-2017 06:21 PM

Hello Fred Hargis.
Thank you very much for your help.
The doors dried well and look great.

-- Julian Paul Jones

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics