LumberJocks

Used SawStop for sale

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by shopmania posted 03-15-2017 01:50 AM 6586 views 0 times favorited 30 replies Add to Favorites Watch
View shopmania's profile

shopmania

701 posts in 3854 days


03-15-2017 01:50 AM

Topic tags/keywords: tablesaw

I have a SawStop contractors saw w cast iron wings and a 52” fence and table. I have upgraded to a SS cabinet saw w 3 hp 220v motor, again w 52” fence. I have posted it on 3 local Craigslist pages, but I know that may bring lowball offers from people who have no idea what it is or what it’s worth. Just used by me in my garage workshop. You can email me at [email protected] I will probably see that quicker than checking back here for messages. Asking 2,000 or best offer. Was about 2,500-2,600 new. It is a great saw! Thanks!

-- Tim, Myrtle Beach, [email protected] Just one more tool, that's all I need! :)


30 replies so far

View papadan's profile

papadan

3584 posts in 4040 days


#1 posted 03-15-2017 01:53 AM

About 80% of new, good luck!

View RobS888's profile

RobS888

2712 posts in 2516 days


#2 posted 03-15-2017 02:48 AM


About 80% of new, good luck!

- papadan


It’s a sawstop, so it is worth it. Don’t let your ignorance and prejudice influence you so much.

-- I always knew gun nuts where afraid of something, just never thought popcorn was on the list.

View GR8HUNTER's profile

GR8HUNTER

7138 posts in 1384 days


#3 posted 03-15-2017 03:14 AM

IT is a very nice saw I looked at pictures …..wish I was closer and had extra 2k ….. GOOD LUCK :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View bonesbr549's profile

bonesbr549

1588 posts in 3738 days


#4 posted 03-15-2017 01:11 PM

Decent price. They are like festool hold the value. Not like a delta or griz. Good luck on the sale.

-- Sooner or later Liberals run out of other people's money.

View Underdog's profile

Underdog

1471 posts in 2707 days


#5 posted 03-15-2017 03:25 PM

Wish I had the $2,000. I’d probably make the drive up there… Good luck with the sale. Someone will buy it.

-- Jim, Georgia, USA

View papadan's profile

papadan

3584 posts in 4040 days


#6 posted 03-17-2017 03:42 PM

It s a sawstop, so it is worth it. Don t let your ignorance and prejudice influence you so much.

- RobS888

View 000's profile

000

2859 posts in 1571 days


#7 posted 03-17-2017 03:53 PM

I wouldn’t buy a 5 year old saw for only 600.00 less than new.
I would spring the extra $$ and buy new..maybe that’s just me, IDK

(If this is the same saw)
https://myrtlebeach.craigslist.org/tls/6044409141.html

View alittleoff's profile

alittleoff

548 posts in 1948 days


#8 posted 03-17-2017 04:16 PM

The saw may be worth 2000.00, I don’t know. The problem I see is anyone who is going to spend 2000 dollars on a saw will buy a new one I would think, I would.

https://bissafetysaw.com/pcs175-tgp252-sawstop-professional-saw-1-75hp-120v-w-52-fence-assembly.html?gclid=CjwKEAjwkq7GBRDun9iu2JjyhmsSJADHCD_H2HGesQIkIG1_X4f45hJhbEEi6JqTJ2h-6V9Rxf41cBoCYlXw_wcB

View BenDupre's profile

BenDupre

733 posts in 1159 days


#9 posted 03-18-2017 06:11 AM

No used tool is worth more than half it’s value new. Not even the sawstop. Good luck.

-- The problem with communication is the illusion that it has occurred. – George Bernard Shaw

View bbasiaga's profile

bbasiaga

1243 posts in 2666 days


#10 posted 03-18-2017 12:41 PM

Many do sell for more than half their new value though. Especially sawstops, festools and other premium brands.

-- Part of engineering is to know when to put your calculator down and pick up your tools.

View dhazelton's profile

dhazelton

2839 posts in 2968 days


#11 posted 03-18-2017 12:57 PM

Gotta say, I see some corrosion on front rail – can’t tell condition much from other photos but it’s a humid environment. Electronics are 5 years old – solder joints and caps fail. I think it’s an ambitious asking price. I’d buy new and get a warranty.

View johnstoneb's profile

johnstoneb

3131 posts in 2844 days


#12 posted 03-18-2017 01:27 PM

With the standard fence and wings that saw sells for about $2000. When selling used accessories don’t add much to the price. $1500 probably max and expect to come down from there.

-- Bruce, Boise, ID

View avsmusic1's profile

avsmusic1

592 posts in 1357 days


#13 posted 03-18-2017 02:10 PM

@OP – I’m sure you care very little about my opinion on your asking price so i’ll simply say good luck. It’s certainly a nice saw. Tell the new owner to make some cool stuff and post it up here!

View ChuckV's profile

ChuckV

3281 posts in 4199 days


#14 posted 03-18-2017 02:39 PM


No used tool is worth more than half it s value new. Not even the sawstop. Good luck.

- BenDupre

So, if I buy a new saw for $4,000 and use it one time, I will not find someone to buy it from me for $2,001.

-- “Big man, pig man, ha ha, charade you are.” ― R. Waters

View mat60's profile

mat60

34 posts in 1128 days


#15 posted 03-18-2017 02:49 PM

I dont think anyone said that. If you used it one time you may get 3,001.

showing 1 through 15 of 30 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com