Removing infeed/Outfeed tables from Delta 37-315 jointer

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by rambo2_981 posted 03-12-2017 06:32 PM 1068 views 0 times favorited 1 reply Add to Favorites Watch
View rambo2_981's profile


6 posts in 1947 days

03-12-2017 06:32 PM

I’m restoring a 1978 Delta 37-315 8” Jointer, and am not sure how the Infeed/Outfeed Tables come off. I can loosen the gibs and see if the threaded height adjustment shafts come off. But before I do anything, I’d like to hear from someone who has done this in case there’s something I ought to be doing. Both tables are held to the base with a dovetail arrangement and the gibs apply pressure to one side. Thanks.


1 reply so far

View Richard Lee's profile

Richard Lee

299 posts in 1580 days

#1 posted 03-12-2017 09:39 PM

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics