Wooden Screw for Leg Vise

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by schu777 posted 03-07-2017 05:25 PM 946 views 0 times favorited 1 reply Add to Favorites Watch
View schu777's profile


35 posts in 3545 days

03-07-2017 05:25 PM

One Hard Maple wood vice screw:

  • 23-1/2” long
  • Approximately 13-1/2” of threads
  • Approximately 5-3/4” of space between Head and threads
  • Garter is 3/8” wide and almost 1/4” deep.
  • Head of the screw is 4-7/16” long
  • 1” hole in head – center of head (2-1/4”)
  • Made from two boards glued together – glue line is in the center of the screw
  • Blemish on the threads (see picture) goes in approximately 5” into the threads
One hard maple nut
  • Approximately 2” thick x 4” wide and 11-11/16” wide
  • NOT INCLUDED is a handle and Garter – you’ll have to purchase a handle and make your own garter.

$115 (Includes shipping to lower 48) – shipping via USPS unless you want different delivery, which buyer will pay for difference.

Notice I put on mineral spirits on the Head, non-thread portion of the screw and top of the nut to show the figure. This screw has no finish on it nor anything else on the threads. It will be up to you of how you want to finish the head and lubricate the threads.

-- Michael S. - Omaha, NE

1 reply so far

View higtron's profile


279 posts in 3916 days

#1 posted 03-07-2017 10:40 PM

Wow this is so cool, I went to your page and looked a all your blogs on building this wooden leg vice screw way to stick with it hope it pays off for you.

-- A friend will help you move, a good friend will help you move a body

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics