Forum topic by OddTodd | posted 01-10-2017 06:28 PM | 3027 views | 0 times favorited | 10 replies | ![]() |
![]() |
01-10-2017 06:28 PM |
Topic tags/keywords: question atlas 7122 spindle adapter lathe Just acquired this lathe yet I can’t seem to find a adapter to deal with the old 1” x 10tpi head stock spindle. I have 1” x 8” chucks, etc. so I need an adapter from 1” x 10tpi to 1” x 8tpi. Any ideas where to find a spindle adapter this size? -- "Lathe down your tool to rest and make your piece" Splinter Haven (Todd York) |
10 replies so far
#1 posted 01-10-2017 06:52 PM |
These guys sell all sorts of spindle adapters… and a 1×10 to 1×8 is listed. Although it’s a bit pricey :) Best Wood Tools - Spindle Adapters Cheers, -- Brad in FL - In Dog I trust... everything else is questionable |
#2 posted 01-10-2017 09:11 PM |
If the chuck is a Oneway, there’s no problem getting an adaptor, https://oneway.ca/products-category/adaptors/Oneway-Talon-Adaptors -- Have fun and take care |
#3 posted 01-13-2017 05:57 AM |
1×10 shouldn’t be hard to find. I have one for my GP but don’t remember where I bought it. It would have been Highland Hardware, Amazon, or Ebay; since that’s the only places I’ve bought chucks and adaptors. -- Rick M, http://thewoodknack.blogspot.com/ |
#4 posted 01-24-2022 06:34 PM |
I also have an Atlas lathe with the same 1”x10TPI spindle and am looking for the 1”x8TPI adapter but so far no luck. Did you find one and if so where? Any help would be appreciated. Thanks, Frank |
#5 posted 01-24-2022 06:38 PM |
did you see the reference mrunix posted ? try them. -- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF. |
#6 posted 01-24-2022 06:45 PM |
I went to the site referenced by MrUnix and they don’t carry the size I need. |
#7 posted 01-24-2022 07:09 PM |
I went to the site referenced by MrUnix and they don’t carry the size I need. Bummer… it is still listed on the site, but now marked as “Not available”. In the mean time, you can always get yourself a 1”x10tpi thread tap and make an unlimited number of face plates, jam chucks, mandrels, polishing cones, sanding discs, etc… basically for free using scrap wood (see here: Woodturning on the cheap). Cheers, -- Brad in FL - In Dog I trust... everything else is questionable |
#8 posted 01-24-2022 07:49 PM |
I went to the site referenced by MrUnix and they don t carry the size I need. Give them a call … (931) 456-6155 or (931) 788-0429. Victor (the owner) has helped me out a couple of times … outstanding customer service. -- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!" |
#9 posted 01-25-2022 03:17 PM |
I called Best Wood Tools as was suggested and, voila, he is going to make the spindle adapter I need. Problem solved thanks to you guys and The Dane in particular. Thank you very much. |
#10 posted 02-09-2022 08:09 PM |
No comment |
Have your say...
You must be signed in to reply.
|
Forum | Topics |
---|---|
Woodworking Skill Share
|
13542 |
Woodturning
|
3007 |
Woodcarving
|
618 |
Scrollsawing
|
436 |
Joinery
|
2074 |
Finishing
|
6705 |
Designing Woodworking Projects
|
8187 |
Power Tools, Hardware and Accessories
|
34175 |
CNC Woodworking
|
384 |
Hand Tools
|
6768 |
Jigs & Fixtures
|
1920 |
Wood & Lumber
|
7611 |
Safety in the Woodworking Shop
|
1696 |
Focus on the Workspace
|
2749 |
Sweating for Bucks Through Woodworking
|
1295 |
Woodworking Trade & Swap
|
5574 |
LumberJocks.com Site Feedback
|
2431 |
Coffee Lounge
|
9900 |