Curly Super Wide Red Maple, Nice Curly Maple

« back to Woodworking Trade & Swap forum

150 posts in 4027 days

08-09-2010 03:47 AM

Super wide Curly red maple.. NICE! 4 pieces that have the following dimensions:

14.5” wide x 1” thick x 8’ long
13.5” wide x 1.25” thick and 10’ long
13.5” wide x 1” thick and 9’ long
15.25” wide 1” thick and 9’ long

Total bf is 45 @ 12.00/bf. Sold as one lot only!

This is superb material in this width and length.

Won’t find this ANYWHERE!
———————————————————————————

Second lot is 165 bf of 6-9 foot material 4/4 and 5/4 6-11” wide with lots of figure. $7/bf

Can plane and joint for additional charge.

super material, all kiln dried.

Call Kyle at 704-258-8985

shipping via freightquote.

-- Kyle Edwards, http://www.sawmillnc.com, Iron Station , NC (near Charlotte)

2 replies so far

schloemoe home \| projects \| blog 709 posts in 3910 days #1 posted 08-09-2010 04:00 AM	Wish I had $550.00 dollars…............................Schloemoe -- schloemoe, Oregon , http://www. woodrehab.blogspot.com
jusfine home \| projects \| blog 2422 posts in 3898 days #2 posted 08-09-2010 04:42 AM	I would spend the money, but the freight to Canada would kill me… :( -- Randy "You are judged as much by the questions you ask as the answers you give..."

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	13136
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2783
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	564
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	413
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1869
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	6302
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	7855
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	32533
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	325
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	6421
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1784
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	7244
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1613
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2614
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1266
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	5393
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2394
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	9626

	Author	Latest activity	New comments or replies since you last checked
Wood Shelf with Luban Joint	HANN	01-23-2021 08:51 PM	sign in to get readership tracking
Laguna 1412 Bandsaw Mods and Musings #2: Dust Collection Mods	pintodeluxe	01-23-2021 08:51 PM	sign in to get readership tracking
A competitor for Saw Stop?	MrBob54	01-23-2021 08:51 PM	sign in to get readership tracking
Dog Barrier	granite	01-23-2021 08:48 PM	sign in to get readership tracking
ponciano's Profile	ponciano	01-23-2021 08:40 PM	sign in to get readership tracking
Antique buffet restoration	JeanValjean	01-23-2021 08:39 PM	sign in to get readership tracking
Top Ten Power Tools...If you could only have Ten	BoilerUp21	01-23-2021 08:39 PM	sign in to get readership tracking
2021 Surprise Swap	clieb91	01-23-2021 08:35 PM	sign in to get readership tracking
Wood sources southeast Florida?	Rick223	01-23-2021 08:31 PM	sign in to get readership tracking
Contemporary Adirondack Chair, Walnut and Aluminum	coreyg089	01-23-2021 08:25 PM	sign in to get readership tracking

Curly Super Wide Red Maple, Nice Curly Maple

2 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...