I have a problem with my WS3000

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Zuki posted 03-23-2010 11:45 PM 1010 views 0 times favorited 1 reply Add to Favorites Watch
View Zuki's profile


1404 posts in 4471 days

03-23-2010 11:45 PM

I have a problem with my WS3000. I purchased it in January 2009 and used it once to sharpen all my chisels. I went to re-sharpen my chisels 2 days ago and had difficulty in turning the fence adjustment knob. That is the part that keeps the chisels in alignment against the spinning wheel.

It would only turn allowing the fence to move to the right. The chisels sit on the left of the fence. It is currently all the way to the right. It will move to the left ever so slightly; however I do not want to force it. The threads look clean.

I emailed the company but it bounced back

-- BLOG -

1 reply so far

View pommy's profile


1697 posts in 4085 days

#1 posted 03-23-2010 11:59 PM

good old DW40 should do the trick

-- cut it saw it scrap it SKPE: ANDREW.CARTER69

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics