Sweet Craigslist Jointer - Northern CA

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by WayneC posted 03-09-2010 11:15 PM 4173 views 0 times favorited 12 replies Add to Favorites Watch
View WayneC's profile


14358 posts in 4640 days

03-09-2010 11:15 PM

Topic tags/keywords: tool jointer

12” Crescent Rockwell 12” Jointer. 5 HP/3 Phase. I would love to have one of these….


-- We must guard our enthusiasm as we would our life - James Krenov

12 replies so far

View Padre's profile


930 posts in 4032 days

#1 posted 03-09-2010 11:18 PM

I wonder if he’d deliver to New England? :) :)

That is a sweet machine. You don’t see those up for sale very often.

-- Chip ----------- 6:8

View Abbott's profile


2570 posts in 3846 days

#2 posted 03-09-2010 11:18 PM

-- Ohh mann...pancakes and boobies...I'll bet that's what Heaven is like! ♣ ♣ ♣ ♣

View Karson's profile


35207 posts in 4943 days

#3 posted 03-10-2010 12:25 AM

A buddie and I went together and bought a beast like that. Then about 2 hrs later he wanted it all to himself.

He took it apart to clean (7 yrs ago) and it’s still apart. His has babbit bearings and he wanted to pour new ones. I think the old ones were ok, because it was a working machine in a carpentry shop when it was bought.

That would be a great buy.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Appomattox Virginia [email protected]

View SCOTSMAN's profile


5849 posts in 4128 days

#4 posted 03-10-2010 12:28 AM

Some Budie phew That doesn’t sound like much of a friend.Grandpa Alistair

-- excuse my typing as I have a form of parkinsons disease

View jemillion's profile


28 posts in 3994 days

#5 posted 03-10-2010 01:24 AM

Hey guys, My buddie is selling one very close to this. He lives in New Mexico. Might be worth a trip there!

Here is the link.

View Grumpy's profile


25801 posts in 4394 days

#6 posted 03-10-2010 02:02 AM

That is one solid machine.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View SnowyRiver's profile


51458 posts in 4023 days

#7 posted 03-10-2010 05:39 AM

Cant beat those old machines.

-- Wayne - Plymouth MN

View MedicKen's profile


1615 posts in 4005 days

#8 posted 03-10-2010 05:53 AM

That one has been on the list for some time. I have even seen it listed over on owwm. I bet with an offer he would jump on it. I love the old Crescents. Heres mine, its little brother, an 8”. But even though a little brother he still weighs in at 1200#

-- My job is to give my kids things to discuss with their [email protected]

View rockom's profile


134 posts in 4414 days

#9 posted 03-10-2010 03:54 PM

Check out pleasantstmachinery on ebay. He is just around the corner from me. He’s usually got a couple 12”~16” jointers and many other large machines. Unfortunately, I have neither the space or cash for these machines.


-- -> Malta, IL -<

View BTKS's profile


1989 posts in 4007 days

#10 posted 12-31-2011 08:10 PM

I just purchasede this 12in Silver mfg jointer, day before yesterday. The tables look a lot better now but I just checked and I’ve got some leveling of the tables to do. The motor is a 2hp single phase 220volt with three belt drive. It was built sometime between 1906 and 1920 is the best I can guess. I’ve got a lot of work to do.

-- "Man's ingenuity has outrun his intelligence" (Joseph Wood Krutch)

View BTKS's profile


1989 posts in 4007 days

#11 posted 12-31-2011 08:11 PM

This is the pic I meant to post, but only half to the pic is here. I’m new to photobucket. The thing weighs in at about 1200lbs.

-- "Man's ingenuity has outrun his intelligence" (Joseph Wood Krutch)

View BTKS's profile


1989 posts in 4007 days

#12 posted 01-01-2012 02:39 AM

August, I didn’t weigh anything but the original tool catalogs from the era listed the crated weight and net weight. The 12in machine with motor was 1250. I don’t know the difference between this motor and the original but it’s almost certain to weigh less than the original.
I cleaned the tables and fence and am now in the process of shiming the outfeed table to as close to flush with the cutterhead as I can get it. One corner of the outfeed table droops down but the bad spot is behind the fence. Oh well, for what I plan to do with it, it is good to go.
Later, BTKS

-- "Man's ingenuity has outrun his intelligence" (Joseph Wood Krutch)

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics